Part: 1403
In Stock
$229.00
(Incl. GST)
This universal interface converts CAN-Bus signals to analogue outputs to enable installation of many different types of aftermarket products like:
- Car Alarms
- GPS Satellite Systems
- Parking Sensors
- ADAS Systems
- High Beam Trigger for Light Bars or Spot Lights
- Aftermarket Car Radio and much more.
It is currently compatible with 270 different models of cars and the list will continue to grow. (Please see current list under the Downloads Tab)
The following CAN Bus Signals can be converted to an Analogue signal. Please note that not all the below signals are available for every vehicle in the compatibility list. Please contact us to find out what signals are available for your vehicle.
|
|
Compatible with the following BYD Vehicles:
- BYD Shark 6 from 2025 (Requires Rev Date 120525)
Compatible with the following Chevrolet Vehicles:
- Silverado 1500 from 2023 (Requires Rev Date 120525)
- Silverado 2500 & 3500 from 2021 (Requires Rev Date 120525)
Compatible with the following Ford Vehicles:-
- F-Truck with Sync 4 from 2022
- Next-Gen Everest from 2022
- Next-Gen Ranger from 2022
- Next-Gen Ranger Super Duty from 2025
- PX3 Ranger from 2017 - 2022
- Transit Custom from 2024
Compatible with the following GWM Vehicles:-
- Cannon from 2019 - 2025 (Pre MY25 Facelift)
Compatible with the following Hyundai Vehicles:-
- Kona from 2023 excluding HEV model (Requires Rev Date 120525)
Compatible with the following Isuzu Vehicles:-
- D-MAX from 2020 (MY21) - High Beam Only (Requires Rev Date 120525)
- MU-X from 2022 - High Beam Only (Requires Rev Date 120525)
Compatible with the following KIA Vehicles:-
- EV5 from 2025 (Requires Rev Date 120525)
- Sportage from 2025 (Requires Rev Date 120525) NEW
Compatible with the following Land Rover Vehicles:-
- Defender from 2019 - 2023 (Highbeam Only, No Low Beam or Parklight) NEW
Compatible with the following Mazda Vehicles:-
- BT-50 from 2021 - High Beam Only (Requires Rev Date 120525)
Compatible with the following Mercedes-Benz Vehicles:-
- Sprinter W907 - W910 Short Wheel Base (SWB) from 2018
- Sprinter W907 - W910 Long Wheel Base (LWB) from 2018
Compatible with the following Mitsubishi Vehicles:-
- Outlander from 2021 - 2024 (MY24)
- Outlander from 2025 (MY25) - Facelift with Digital Dash NEW
- All New Triton from 2024
Compatible with the following Nissan Vehicles:-
- X-Trail T33 from 2023
- Navara D27 from 2026 NEW
Compatible with the following RAM Vehicles:-
- DJ 2500 & 3500 from 2019 to 2024
- DS 1500 Classic from 2018
- DT 1500 RAM from 2019 to 2024
Compatible with the following Subaru Vehicles:-
- Forester S5 from 2021 to 2025
- Impreza (inc WRX) from 2023 - 2026 (Requires Rev Date 230326) NEW
- Outback (5GEN) from 2018 - 2020
- Outback (6GEN) from 2021 - 2025 (Requires Rev Date 230326) NEW
Compatible with the following Toyota Vehicles:-
- Camry from 2018 - 2024
- Coaster Bus from 2025+ NEW
- Hiace from 2025+ NEW
- Hilux N80 - all models from late 2020 - 2025
- Hilux N90 - all models from 2026 NEW
- Kluger - all models from MY2021 - 2023
- Kluger - all models from MY2024 - current
- LandCruiser 300 Series - all models from 2021 - 2024
- LandCruiser 300 Series - all models from 2025
- Prado 150 - all models from late 2019 til late 2024 (with factory CarPlay & Android Auto)
- All New Prado 250 from late 2024
- RAV4 - all models from 2018 - 2025
- New RAV4 - all models from MY26 NEW
- Tundra from 2024
Compatible with the following Volkswagen Vehicles:-
- Amarok from 2023
-
Touareg CR & RC from 2018
Product Information
International Compatibility List - Download
This product comes with a 2 Year return to base warranty against manufacturing defects. For all technical support or to make a warranty claim, contact the company/business that supplied/installed the product for you. Advanced ICE Pty Ltd is not liable for any remove or refit charges incurred. If the product fails within 30 days of purchase or installation, the product will be replaced or exchanged provided sufficient proof can be provided via picture or video that the fault/problem is as a result of a manufacturing defect. If the product fails after 30 days, the product should be returned to Advanced ICE Pty Ltd and it will be repaired or replaced once confirmation is made that the fault/problem is because of a manufacturing defect. This warranty does not cover faults related to user error, damage or incorrect installation.
Please contact the company/business that installed the product for you and arrange a time to have the product inspected. If you do not know this information or you are experiencing problems making the warranty claim, please log a support case by emailing Advanced ICE Pty Ltd directly on the below email address. Before emailing, please ensure you have a copy of the Proof of purchase, the products serial number (if product is serialised) and the product has been registered on the Advanced ICE website.
Advanced ICE Pty Ltd - Email - support@advancedice.com.au – Website – www.advancedice.com.au
Advanced ICE Pty Ltd recommends that you read our website and watch any videos if available before purchasing to ensure that the features and functions of the product are suitable for your requirements. If you are not sure, please contact an authorised re seller or our sales and technical support team for further assistance before purchasing the product.
Change of Mind (Pre Installation) - Products can be returned within 14 days of purchase provided it is in Brand New unopened condition. Products must be returned to the place of purchase, they should not be returned directly to Advanced ICE if the product was purchased through a re seller. All Freight charges are at the buyer’s expense and a 10% fee will be charged to cover handling and restocking. A refund will only be issued once the product has been examined and confirmed to be in new condition.