Part: 1403-1
In Stock
$229.00
(Incl. GST)
Our CAN-Bus Interface is designed to simplify the installation of aftermarket lighting like Light Bars and Spot Lights by reading the vehicle’s CAN-Bus Network and providing the needed analogue outputs.
![]()
This interface comes pre-programmed to convert the following CAN-Bus Signals to an Analogue 12V positive output:
- Park Lights
- Low Beam Headlights
- High Beam
Note: Customised Outputs available on request. Please contact our technical support team for more information.
Pre-Programmed Outputs
This interface comes pre-programmed to convert the following CAN-Bus Signals to an Analogue 12V positive output:
- PARK LIGHTS
- LOW BEAM HEADLIGHTS
- HIGH BEAM
A range of different outputs are able to be configured by programming with the 1403-PRG programmer or by us on request. Contact our friendly team for technical support and more information.
Compatible vehicles
Select your vehicle to see the pre-programmed outputs, where to connect, and the outputs available by programming.
BYD 2 vehicles
Sealion 7
2024 on
Requires rev. date 120525 or later
Pre-programmed outputs
| Function | Output |
|---|---|
| Park lights | 12 V+ (300 mA) |
| Low beam headlights | 12 V+ (300 mA) |
| High beam | 12 V+ (300 mA) |
- CAN connection: Passenger Side above the Kick Panel at the Black BCM connector.
View programmable outputs (19)
Tested on this vehicle and available by custom programming via PC with the 1403-PRG programmer (sold separately) or on request. ✓ Available – Not available
- –CAR LOCKING BY RKE/AUTOCLOSE
- –CAR LOCKING BY MECH. KEY
- –UNLOCK TRUNK BY RKE
- –AUTOCLOSE
- –CAR UNLOCKING BY MECH. KEY
- ✓IGNITION KEY ON
- ✓CAR LOCK BY RKE
- ✓CAR UNLOCKING BY RKE
- ✓PARKING LIGHTS
- ✓LOW BEAM LIGHTS
- ✓HIGH BEAM LIGHTS
- ✓PARKING BRAKE
- ✓FOOT BRAKE
- ✓REVERSE GEAR
- –CAR STATUS LOCKED
- ✓DOOR FRONT LEFT1
- ✓DOOR REAR LEFT
- ✓DOOR FRONT RIGHT1
- ✓DOOR REAR RIGHT
- ✓HOOD
- ✓TRUNK
- –TRUNK WINDOW
- ✓DOORS + HOOD
- –INHIBITION TIMER
- ✓INDICATOR LIGHTS2
- ✓INDICATOR LIGHT LEFT2
- ✓INDICATOR LIGHT RIGHT2
- –ACCY ON TILL KEY REMOVED
- –ACCY ON TILL DOORS OPENED
- –ALARM ARMED
- –SEAT BELT DRIVER
- –SEAT BELT PASSENGER
- –CENTRAL DOOR LOCK
Comments
- 1Front doors are reversed – driver door = front left signal.
- 2Output flashes with the indicator.
Shark 6
2025 on
Requires rev. date 120525 or later
Pre-programmed outputs
| Function | Output |
|---|---|
| Park lights | 12 V+ (300 mA) |
| Low beam headlights | 12 V+ (300 mA) |
| High beam | 12 V+ (300 mA) |
- CAN connection: Passenger side kick panel, below the glove box.
View programmable outputs (25)
Tested on this vehicle and available by custom programming via PC with the 1403-PRG programmer (sold separately) or on request. ✓ Available – Not available
- ✓CAR LOCKING BY RKE/AUTOCLOSE
- –CAR LOCKING BY MECH. KEY
- ✓UNLOCK TRUNK BY RKE
- –AUTOCLOSE
- –CAR UNLOCKING BY MECH. KEY
- ✓IGNITION KEY ON
- ✓CAR LOCK BY RKE
- ✓CAR UNLOCKING BY RKE
- ✓PARKING LIGHTS
- ✓LOW BEAM LIGHTS
- ✓HIGH BEAM LIGHTS
- ✓PARKING BRAKE
- ✓FOOT BRAKE
- ✓REVERSE GEAR
- ✓CAR STATUS LOCKED
- ✓DOOR FRONT LEFT1
- ✓DOOR REAR LEFT
- ✓DOOR FRONT RIGHT1
- ✓DOOR REAR RIGHT
- ✓HOOD
- ✓TRUNK
- –TRUNK WINDOW
- ✓DOORS + HOOD
- ✓INHIBITION TIMER
- ✓INDICATOR LIGHTS
- ✓INDICATOR LIGHT LEFT2
- ✓INDICATOR LIGHT RIGHT2
- –ACCY ON TILL KEY REMOVED
- ✓ACCY ON TILL DOORS OPENED
- ✓ALARM ARMED
- –SEAT BELT DRIVER
- –SEAT BELT PASSENGER
- –CENTRAL DOOR LOCK
Comments
- 1Front doors are reversed – driver door = front left signal.
- 2Indicators are reversed – left output follows the right indicator.
Chevrolet 2 vehicles
Silverado 1500
2024 on
Requires rev. date 140825 or later
Pre-programmed outputs
| Function | Output |
|---|---|
| Park lights | 12 V+ (300 mA) |
| Low beam headlights | 12 V+ (300 mA) |
| High beam | 12 V+ (300 mA) |
- CAN connection: Driver side footwell – BCM module above the pedals, under the steering column.
View programmable outputs (21)
Tested on this vehicle and available by custom programming via PC with the 1403-PRG programmer (sold separately) or on request. ✓ Available – Not available
- ✓CAR LOCKING BY RKE/AUTOCLOSE
- –CAR LOCKING BY MECH. KEY
- –UNLOCK TRUNK BY RKE
- –AUTOCLOSE
- –CAR UNLOCKING BY MECH. KEY
- ✓IGNITION KEY ON
- ✓CAR LOCK BY RKE
- ✓CAR UNLOCKING BY RKE
- ✓PARKING LIGHTS
- ✓LOW BEAM LIGHTS
- ✓HIGH BEAM LIGHTS
- ✓PARKING BRAKE
- ✓FOOT BRAKE
- ✓REVERSE GEAR
- ✓CAR STATUS LOCKED
- ✓DOOR FRONT LEFT1
- ✓DOOR REAR LEFT
- ✓DOOR FRONT RIGHT1
- ✓DOOR REAR RIGHT
- ✓HOOD
- –TRUNK
- –TRUNK WINDOW
- ✓DOORS + HOOD
- –INHIBITION TIMER
- ✓INDICATOR LIGHTS
- ✓INDICATOR LIGHT LEFT2
- ✓INDICATOR LIGHT RIGHT2
- –ACCY ON TILL KEY REMOVED
- ✓ACCY ON TILL DOORS OPENED
- –ALARM ARMED
- –SEAT BELT DRIVER
- –SEAT BELT PASSENGER
- –CENTRAL DOOR LOCK
Comments
- 1Front doors are reversed – driver door = front left signal.
- 2Output flashes with the indicator.
Silverado 2500 / 3500
2024 on
Requires rev. date 140825 or later
Pre-programmed outputs
| Function | Output |
|---|---|
| Park lights | 12 V+ (300 mA) |
| Low beam headlights | 12 V+ (300 mA) |
| High beam | 12 V+ (300 mA) |
- CAN connection: Driver side footwell – BCM module above the pedals, under the steering column.
View programmable outputs (21)
Tested on this vehicle and available by custom programming via PC with the 1403-PRG programmer (sold separately) or on request. ✓ Available – Not available
- ✓CAR LOCKING BY RKE/AUTOCLOSE
- –CAR LOCKING BY MECH. KEY
- –UNLOCK TRUNK BY RKE
- –AUTOCLOSE
- –CAR UNLOCKING BY MECH. KEY
- ✓IGNITION KEY ON
- ✓CAR LOCK BY RKE
- ✓CAR UNLOCKING BY RKE
- ✓PARKING LIGHTS
- ✓LOW BEAM LIGHTS
- ✓HIGH BEAM LIGHTS
- ✓PARKING BRAKE
- ✓FOOT BRAKE
- ✓REVERSE GEAR
- ✓CAR STATUS LOCKED
- ✓DOOR FRONT LEFT1
- ✓DOOR REAR LEFT
- ✓DOOR FRONT RIGHT1
- ✓DOOR REAR RIGHT
- ✓HOOD
- –TRUNK
- –TRUNK WINDOW
- ✓DOORS + HOOD
- –INHIBITION TIMER
- ✓INDICATOR LIGHTS
- ✓INDICATOR LIGHT LEFT2
- ✓INDICATOR LIGHT RIGHT2
- –ACCY ON TILL KEY REMOVED
- ✓ACCY ON TILL DOORS OPENED
- –ALARM ARMED
- –SEAT BELT DRIVER
- –SEAT BELT PASSENGER
- –CENTRAL DOOR LOCK
Comments
- 1Front doors are reversed – driver door = front left signal.
- 2Output flashes with the indicator.
Ford 7 vehicles
F150
2023 on
Pre-programmed outputs
| Function | Output |
|---|---|
| Park lights | 12 V+ (300 mA) |
| Low beam headlights | 12 V+ (300 mA) |
| High beam | 12 V+ (300 mA) |
- Covers F-150 and F-250 / F-350.
- CAN connection: Located in the Driver Side Door Sill Wiring Loom, or Passenger side footwell (kick panel) – grey connector behind the trim.
View programmable outputs (24)
Tested on this vehicle and available by custom programming via PC with the 1403-PRG programmer (sold separately) or on request. ✓ Available – Not available
- ✓CAR LOCKING BY RKE/AUTOCLOSE
- –CAR LOCKING BY MECH. KEY
- –UNLOCK TRUNK BY RKE
- –AUTOCLOSE
- –CAR UNLOCKING BY MECH. KEY
- ✓IGNITION KEY ON
- ✓CAR LOCK BY RKE
- ✓CAR UNLOCKING BY RKE
- ✓PARKING LIGHTS
- ✓LOW BEAM LIGHTS
- ✓HIGH BEAM LIGHTS1
- ✓PARKING BRAKE
- ✓FOOT BRAKE
- ✓REVERSE GEAR2
- ✓CAR STATUS LOCKED
- ✓DOOR FRONT LEFT3
- ✓DOOR REAR LEFT
- ✓DOOR FRONT RIGHT3
- ✓DOOR REAR RIGHT
- ✓HOOD
- –TRUNK
- –TRUNK WINDOW
- ✓DOORS + HOOD
- –INHIBITION TIMER
- ✓INDICATOR LIGHTS
- ✓INDICATOR LIGHT LEFT4
- ✓INDICATOR LIGHT RIGHT4
- –ACCY ON TILL KEY REMOVED
- ✓ACCY ON TILL DOORS OPENED
- ✓ALARM ARMED
- ✓SEAT BELT DRIVER5
- ✓SEAT BELT PASSENGER5
- –CENTRAL DOOR LOCK
Comments
- 1High beam output works with the ignition on (not with the car off).
- 2Reverse output works with the engine running.
- 3Front doors are reversed – driver door = front left signal.
- 4Output flashes with the indicator. Works with the ignition on.
- 5Seat belt outputs work with the ignition on (not with the car off).
F250 / F350
2022 on
Pre-programmed outputs
| Function | Output |
|---|---|
| Park lights | 12 V+ (300 mA) |
| Low beam headlights | 12 V+ (300 mA) |
| High beam | 12 V+ (300 mA) |
- CAN connection: Located in the Driver Side Door Sill Wiring Loom.
View programmable outputs (25)
Tested on this vehicle and available by custom programming via PC with the 1403-PRG programmer (sold separately) or on request. ✓ Available – Not available
- ✓CAR LOCKING BY RKE/AUTOCLOSE
- –CAR LOCKING BY MECH. KEY
- –UNLOCK TRUNK BY RKE
- –AUTOCLOSE
- –CAR UNLOCKING BY MECH. KEY
- ✓IGNITION KEY ON
- ✓CAR LOCK BY RKE
- ✓CAR UNLOCKING BY RKE
- ✓PARKING LIGHTS
- ✓LOW BEAM LIGHTS
- ✓HIGH BEAM LIGHTS
- ✓PARKING BRAKE
- ✓FOOT BRAKE
- ✓REVERSE GEAR
- ✓CAR STATUS LOCKED
- ✓DOOR FRONT LEFT1
- ✓DOOR REAR LEFT
- ✓DOOR FRONT RIGHT1
- ✓DOOR REAR RIGHT
- ✓HOOD
- –TRUNK
- –TRUNK WINDOW
- ✓DOORS + HOOD
- ✓INHIBITION TIMER
- ✓INDICATOR LIGHTS
- ✓INDICATOR LIGHT LEFT2
- ✓INDICATOR LIGHT RIGHT2
- –ACCY ON TILL KEY REMOVED
- ✓ACCY ON TILL DOORS OPENED
- ✓ALARM ARMED
- ✓SEAT BELT DRIVER3
- ✓SEAT BELT PASSENGER3
- –CENTRAL DOOR LOCK
Comments
- 1Front doors are reversed – driver door = front left signal.
- 2Output flashes with the indicator.
- 3Seat belt output works for both driver and passenger seat belts.
Everest (Next-Gen)
2022 on
Pre-programmed outputs
| Function | Output |
|---|---|
| Park lights | 12 V+ (300 mA) |
| Low beam headlights | 12 V+ (300 mA) |
| High beam | 12 V+ (300 mA) |
- CAN connection: Driver side footwell. Make sure the wires you connect to are twisted together, or Passenger side footwell. Make sure the wires you connect to are twisted together.
View programmable outputs (22)
Tested on this vehicle and available by custom programming via PC with the 1403-PRG programmer (sold separately) or on request. ✓ Available – Not available
- ✓CAR LOCKING BY RKE/AUTOCLOSE
- –CAR LOCKING BY MECH. KEY
- ✓UNLOCK TRUNK BY RKE
- –AUTOCLOSE
- –CAR UNLOCKING BY MECH. KEY
- ✓IGNITION KEY ON
- ✓CAR LOCK BY RKE
- –CAR UNLOCKING BY RKE
- ✓PARKING LIGHTS
- ✓LOW BEAM LIGHTS
- ✓HIGH BEAM LIGHTS
- ✓PARKING BRAKE
- ✓FOOT BRAKE
- ✓REVERSE GEAR
- ✓CAR STATUS LOCKED
- ✓DOOR FRONT LEFT1
- ✓DOOR REAR LEFT
- ✓DOOR FRONT RIGHT1
- ✓DOOR REAR RIGHT
- –HOOD
- ✓TRUNK
- –TRUNK WINDOW
- ✓DOORS + HOOD
- ✓INHIBITION TIMER
- –INDICATOR LIGHTS
- ✓INDICATOR LIGHT LEFT2
- ✓INDICATOR LIGHT RIGHT2
- –ACCY ON TILL KEY REMOVED
- ✓ACCY ON TILL DOORS OPENED
- ✓ALARM ARMED
- –SEAT BELT DRIVER
- –SEAT BELT PASSENGER
- –CENTRAL DOOR LOCK
Comments
- 1Front doors are reversed – driver door = front left signal.
- 2Output flashes with the indicator.
Ranger (Next-Gen)
2022 on
Pre-programmed outputs
| Function | Output |
|---|---|
| Park lights | 12 V+ (300 mA) |
| Low beam headlights | 12 V+ (300 mA) |
| High beam | 12 V+ (300 mA) |
- CAN connection: Driver side footwell. Make sure the wires you connect to are twisted together, or Passenger side footwell. Make sure the wires you connect to are twisted together.
View programmable outputs (22)
Tested on this vehicle and available by custom programming via PC with the 1403-PRG programmer (sold separately) or on request. ✓ Available – Not available
- ✓CAR LOCKING BY RKE/AUTOCLOSE
- –CAR LOCKING BY MECH. KEY
- ✓UNLOCK TRUNK BY RKE
- –AUTOCLOSE
- –CAR UNLOCKING BY MECH. KEY
- ✓IGNITION KEY ON
- ✓CAR LOCK BY RKE
- –CAR UNLOCKING BY RKE
- ✓PARKING LIGHTS
- ✓LOW BEAM LIGHTS
- ✓HIGH BEAM LIGHTS
- ✓PARKING BRAKE
- ✓FOOT BRAKE
- ✓REVERSE GEAR
- ✓CAR STATUS LOCKED
- ✓DOOR FRONT LEFT1
- ✓DOOR REAR LEFT
- ✓DOOR FRONT RIGHT1
- ✓DOOR REAR RIGHT
- –HOOD
- ✓TRUNK
- –TRUNK WINDOW
- ✓DOORS + HOOD
- ✓INHIBITION TIMER
- –INDICATOR LIGHTS
- ✓INDICATOR LIGHT LEFT2
- ✓INDICATOR LIGHT RIGHT2
- –ACCY ON TILL KEY REMOVED
- ✓ACCY ON TILL DOORS OPENED
- ✓ALARM ARMED
- –SEAT BELT DRIVER
- –SEAT BELT PASSENGER
- –CENTRAL DOOR LOCK
Comments
- 1Front doors are reversed – driver door = front left signal.
- 2Output flashes with the indicator.
Ranger Super Duty
2025 on
Pre-programmed outputs
| Function | Output |
|---|---|
| Park lights | 12 V+ (300 mA) |
| Low beam headlights | 12 V+ (300 mA) |
| High beam | 12 V+ (300 mA) |
- CAN connection: see the installation manual supplied with the module.
View programmable outputs
Programmable outputs have not been confirmed for this vehicle yet – contact our technical support team.
Ranger PX3
2017 – 2022
Pre-programmed outputs
| Function | Output |
|---|---|
| Park lights | 12 V+ (300 mA) |
| Low beam headlights | 12 V+ (300 mA) |
| High beam | 12 V+ (300 mA) |
- CAN connection: Driver side.
View programmable outputs (20)
Tested on this vehicle and available by custom programming via PC with the 1403-PRG programmer (sold separately) or on request. ✓ Available – Not available
- ✓CAR LOCKING BY RKE/AUTOCLOSE
- –CAR LOCKING BY MECH. KEY
- –UNLOCK TRUNK BY RKE
- –AUTOCLOSE
- –CAR UNLOCKING BY MECH. KEY
- ✓IGNITION KEY ON
- ✓CAR LOCK BY RKE
- ✓CAR UNLOCKING BY RKE
- ✓PARKING LIGHTS
- ✓LOW BEAM LIGHTS
- ✓HIGH BEAM LIGHTS
- ✓PARKING BRAKE
- ✓FOOT BRAKE
- ✓REVERSE GEAR
- ✓CAR STATUS LOCKED
- ✓DOOR FRONT LEFT1
- ✓DOOR REAR LEFT
- ✓DOOR FRONT RIGHT1
- ✓DOOR REAR RIGHT
- ✓HOOD
- –TRUNK
- –TRUNK WINDOW
- ✓DOORS + HOOD
- –INHIBITION TIMER
- –INDICATOR LIGHTS
- ✓INDICATOR LIGHT LEFT2
- ✓INDICATOR LIGHT RIGHT2
- –ACCY ON TILL KEY REMOVED
- ✓ACCY ON TILL DOORS OPENED
- –ALARM ARMED
- –SEAT BELT DRIVER
- –SEAT BELT PASSENGER
- –CENTRAL DOOR LOCK
Comments
- 1Front door outputs are reversed.
- 2Output flashes with indicator.
Transit Custom
2024 on
Pre-programmed outputs
| Function | Output |
|---|---|
| Park lights | 12 V+ (300 mA) |
| Low beam headlights | 12 V+ (300 mA) |
| High beam | 12 V+ (300 mA) |
- CAN connection: Grey connector below the steering wheel.
View programmable outputs (27)
Tested on this vehicle and available by custom programming via PC with the 1403-PRG programmer (sold separately) or on request. ✓ Available – Not available
- ✓CAR LOCKING BY RKE/AUTOCLOSE
- ✓CAR LOCKING BY MECH. KEY
- ✓UNLOCK TRUNK BY RKE
- –AUTOCLOSE
- ✓CAR UNLOCKING BY MECH. KEY
- ✓IGNITION KEY ON
- ✓CAR LOCK BY RKE
- ✓CAR UNLOCKING BY RKE
- ✓PARKING LIGHTS
- ✓LOW BEAM LIGHTS
- ✓HIGH BEAM LIGHTS
- ✓PARKING BRAKE
- ✓FOOT BRAKE
- ✓REVERSE GEAR
- ✓CAR STATUS LOCKED
- ✓DOOR FRONT LEFT1
- ✓DOOR REAR LEFT
- ✓DOOR FRONT RIGHT1
- ✓DOOR REAR RIGHT
- ✓HOOD
- ✓TRUNK
- –TRUNK WINDOW
- ✓DOORS + HOOD
- ✓INHIBITION TIMER
- ✓INDICATOR LIGHTS
- ✓INDICATOR LIGHT LEFT2
- ✓INDICATOR LIGHT RIGHT2
- –ACCY ON TILL KEY REMOVED
- ✓ACCY ON TILL DOORS OPENED
- ✓ALARM ARMED
- –SEAT BELT DRIVER
- –SEAT BELT PASSENGER
- –CENTRAL DOOR LOCK
Comments
- 1Front doors are reversed – driver door = front left signal.
- 2Output flashes with the indicator.
GWM 2 vehicles
Cannon
2019 – 2024
Requires rev. date 240924 or later
Pre-programmed outputs
| Function | Output |
|---|---|
| Park lights | 12 V+ (300 mA) |
| Low beam headlights | 12 V+ (300 mA) |
| High beam | 12 V+ (300 mA) |
- Pre-MY25 facelift models only.
- CAN connection: Passenger side – gateway module behind the glove box, black 20-pin connector.
View programmable outputs (23)
Tested on this vehicle and available by custom programming via PC with the 1403-PRG programmer (sold separately) or on request. ✓ Available – Not available
- ✓CAR LOCKING BY RKE/AUTOCLOSE
- –CAR LOCKING BY MECH. KEY
- –UNLOCK TRUNK BY RKE
- ✓AUTOCLOSE
- –CAR UNLOCKING BY MECH. KEY
- ✓IGNITION KEY ON
- ✓CAR LOCK BY RKE
- ✓CAR UNLOCKING BY RKE
- ✓PARKING LIGHTS
- ✓LOW BEAM LIGHTS
- ✓HIGH BEAM LIGHTS
- ✓PARKING BRAKE
- ✓FOOT BRAKE
- ✓REVERSE GEAR
- –CAR STATUS LOCKED
- ✓DOOR FRONT LEFT1
- ✓DOOR REAR LEFT
- ✓DOOR FRONT RIGHT1
- ✓DOOR REAR RIGHT
- ✓HOOD
- –TRUNK
- –TRUNK WINDOW
- ✓DOORS + HOOD
- ✓INHIBITION TIMER
- ✓INDICATOR LIGHTS
- ✓INDICATOR LIGHT LEFT
- ✓INDICATOR LIGHT RIGHT
- –ACCY ON TILL KEY REMOVED
- ✓ACCY ON TILL DOORS OPENED
- ✓ALARM ARMED
- –SEAT BELT DRIVER
- –SEAT BELT PASSENGER
- –CENTRAL DOOR LOCK
Comments
- 1Front doors are reversed – driver door = front left signal.
Cannon
2025 on
Requires rev. date 231026 or later
Pre-programmed outputs
| Function | Output |
|---|---|
| Park lights | 12 V+ (300 mA) |
| Low beam headlights | 12 V+ (300 mA) |
| High beam | 12 V+ (300 mA) |
- CAN connection: Passenger side – CEM (body control / gateway module) behind the glove box. CAN wires at the grey connector with the orange lock (right-hand connector in the photo).
View programmable outputs (21)
Tested on this vehicle and available by custom programming via PC with the 1403-PRG programmer (sold separately) or on request. ✓ Available – Not available
- ✓CAR LOCKING BY RKE/AUTOCLOSE
- –CAR LOCKING BY MECH. KEY
- –UNLOCK TRUNK BY RKE
- ✓AUTOCLOSE
- –CAR UNLOCKING BY MECH. KEY
- ✓IGNITION KEY ON
- ✓CAR LOCK BY RKE
- ✓CAR UNLOCKING BY RKE
- –PARKING LIGHTS
- –LOW BEAM LIGHTS
- ✓HIGH BEAM LIGHTS
- ✓PARKING BRAKE
- ✓FOOT BRAKE
- ✓REVERSE GEAR
- ✓CAR STATUS LOCKED
- ✓DOOR FRONT LEFT1
- ✓DOOR REAR LEFT
- ✓DOOR FRONT RIGHT1
- ✓DOOR REAR RIGHT
- –HOOD
- –TRUNK
- –TRUNK WINDOW
- ✓DOORS + HOOD
- ✓INHIBITION TIMER
- ✓INDICATOR LIGHTS2
- ✓INDICATOR LIGHT LEFT2
- ✓INDICATOR LIGHT RIGHT2
- –ACCY ON TILL KEY REMOVED
- ✓ACCY ON TILL DOORS OPENED
- ✓ALARM ARMED
- –SEAT BELT DRIVER
- –SEAT BELT PASSENGER
- –CENTRAL DOOR LOCK
Comments
- 1Front doors are reversed – front left and front right are swapped.
- 2Indicator outputs are reversed – left and right are swapped (outputs flash).
Hyundai 1 vehicle
Kona
2023 on
Requires rev. date 120525 or later
Pre-programmed outputs
| Function | Output |
|---|---|
| Park lights | 12 V+ (300 mA) |
| Low beam headlights | 12 V+ (300 mA) |
| High beam | 12 V+ (300 mA) |
- Not compatible with the HEV (hybrid) model.
- CAN connection: Rear of the BCM / fuse box, driver side right of the steering wheel – black 32-pin connector. Red = CAN-H, Blue = CAN-L.
View programmable outputs (18)
Tested on this vehicle and available by custom programming via PC with the 1403-PRG programmer (sold separately) or on request. ✓ Available – Not available
- ✓CAR LOCKING BY RKE/AUTOCLOSE
- –CAR LOCKING BY MECH. KEY
- –UNLOCK TRUNK BY RKE
- –AUTOCLOSE
- –CAR UNLOCKING BY MECH. KEY
- ✓IGNITION KEY ON
- ✓CAR LOCK BY RKE
- ✓CAR UNLOCKING BY RKE
- ✓PARKING LIGHTS
- ✓LOW BEAM LIGHTS
- ✓HIGH BEAM LIGHTS
- –PARKING BRAKE
- ✓FOOT BRAKE
- –REVERSE GEAR
- ✓CAR STATUS LOCKED
- ✓DOOR FRONT LEFT
- ✓DOOR REAR LEFT
- ✓DOOR FRONT RIGHT
- ✓DOOR REAR RIGHT
- ✓HOOD
- ✓TRUNK
- –TRUNK WINDOW
- ✓DOORS + HOOD
- ✓INHIBITION TIMER
- –INDICATOR LIGHTS
- –INDICATOR LIGHT LEFT
- –INDICATOR LIGHT RIGHT
- –ACCY ON TILL KEY REMOVED
- ✓ACCY ON TILL DOORS OPENED
- –ALARM ARMED
- –SEAT BELT DRIVER
- –SEAT BELT PASSENGER
- –CENTRAL DOOR LOCK
Isuzu 2 vehicles
D-MAX
2020 on (MY21)
Requires rev. date 120225 or later
High beam only on this vehicle – park lights and low beam are not available.
Pre-programmed outputs
| Function | Output |
|---|---|
| High beam | 12 V+ (300 mA) |
- CAN connection: Driver side kick panel – grey connector behind the kick panel.
View programmable outputs (24)
Tested on this vehicle and available by custom programming via PC with the 1403-PRG programmer (sold separately) or on request. ✓ Available – Not available
- ✓CAR LOCKING BY RKE/AUTOCLOSE
- –CAR LOCKING BY MECH. KEY
- –UNLOCK TRUNK BY RKE
- –AUTOCLOSE
- –CAR UNLOCKING BY MECH. KEY
- ✓IGNITION KEY ON
- ✓CAR LOCK BY RKE
- ✓CAR UNLOCKING BY RKE
- ✓PARKING LIGHTS
- ✓LOW BEAM LIGHTS
- ✓HIGH BEAM LIGHTS
- ✓PARKING BRAKE1
- ✓FOOT BRAKE
- ✓REVERSE GEAR
- ✓CAR STATUS LOCKED
- ✓DOOR FRONT LEFT2
- ✓DOOR REAR LEFT
- ✓DOOR FRONT RIGHT2
- ✓DOOR REAR RIGHT
- –HOOD
- –TRUNK
- –TRUNK WINDOW
- ✓DOORS + HOOD3
- ✓INHIBITION TIMER
- ✓INDICATOR LIGHTS
- ✓INDICATOR LIGHT LEFT4
- ✓INDICATOR LIGHT RIGHT4
- –ACCY ON TILL KEY REMOVED
- ✓ACCY ON TILL DOORS OPENED
- ✓ALARM ARMED
- ✓SEAT BELT DRIVER
- ✓SEAT BELT PASSENGER
- –CENTRAL DOOR LOCK
Comments
- 1Park brake output remembers its last status.
- 2Front doors are reversed – driver door = front left signal.
- 3Hood is not included in Doors + hood.
- 4Indicators are reversed and the output flashes with the indicator.
MU-X
2022 on
Requires rev. date 231026 or later
High beam only on this vehicle – park lights and low beam are not available.
Pre-programmed outputs
| Function | Output |
|---|---|
| High beam | 12 V+ (300 mA) |
- CAN connection: Driver side kick panel – grey connector behind the kick panel.
View programmable outputs (23)
Tested on this vehicle and available by custom programming via PC with the 1403-PRG programmer (sold separately) or on request. ✓ Available – Not available
- ✓CAR LOCKING BY RKE/AUTOCLOSE
- –CAR LOCKING BY MECH. KEY
- –UNLOCK TRUNK BY RKE
- –AUTOCLOSE
- –CAR UNLOCKING BY MECH. KEY
- ✓IGNITION KEY ON
- ✓CAR LOCK BY RKE
- ✓CAR UNLOCKING BY RKE
- ✓PARKING LIGHTS
- ✓LOW BEAM LIGHTS
- ✓HIGH BEAM LIGHTS1
- ✓PARKING BRAKE1
- ✓FOOT BRAKE
- ✓REVERSE GEAR1
- ✓CAR STATUS LOCKED
- ✓DOOR FRONT LEFT2
- ✓DOOR REAR LEFT
- ✓DOOR FRONT RIGHT2
- ✓DOOR REAR RIGHT
- –HOOD
- –TRUNK
- –TRUNK WINDOW
- ✓DOORS + HOOD3
- –INHIBITION TIMER
- ✓INDICATOR LIGHTS4
- ✓INDICATOR LIGHT LEFT4
- ✓INDICATOR LIGHT RIGHT4
- –ACCY ON TILL KEY REMOVED
- ✓ACCY ON TILL DOORS OPENED
- ✓ALARM ARMED
- ✓SEAT BELT DRIVER1
- ✓SEAT BELT PASSENGER1
- –CENTRAL DOOR LOCK
Comments
- 1Not available with car off.
- 2Front doors are reversed – driver door = front left signal.
- 3Doors only – the hood and tailgate are not included.
- 4Output flashes with indicator. Left and right indicators are reversed (left = right signal) and not available with car off.
Kia 3 vehicles
EV5
2025 on
Requires rev. date 080425 or later
Pre-programmed outputs
| Function | Output |
|---|---|
| Park lights | 12 V+ (300 mA) |
| Low beam headlights | 12 V+ (300 mA) |
| High beam | 12 V+ (300 mA) |
- CAN connection: Rear of the BCM / fuse box, driver side right of the steering wheel – black 32-pin connector. Pin 17 (Red or Green) = CAN-H, pin 16 (Blue or Orange) = CAN-L.
View programmable outputs (20)
Tested on this vehicle and available by custom programming via PC with the 1403-PRG programmer (sold separately) or on request. ✓ Available – Not available
- ✓CAR LOCKING BY RKE/AUTOCLOSE
- –CAR LOCKING BY MECH. KEY
- –UNLOCK TRUNK BY RKE
- –AUTOCLOSE
- –CAR UNLOCKING BY MECH. KEY
- ✓IGNITION KEY ON
- ✓CAR LOCK BY RKE
- ✓CAR UNLOCKING BY RKE
- ✓PARKING LIGHTS
- ✓LOW BEAM LIGHTS
- ✓HIGH BEAM LIGHTS
- –PARKING BRAKE
- ✓FOOT BRAKE
- ✓REVERSE GEAR1
- ✓CAR STATUS LOCKED
- ✓DOOR FRONT LEFT2
- ✓DOOR REAR LEFT
- ✓DOOR FRONT RIGHT2
- ✓DOOR REAR RIGHT
- ✓HOOD
- ✓TRUNK
- –TRUNK WINDOW
- ✓DOORS + HOOD
- ✓INHIBITION TIMER
- –INDICATOR LIGHTS
- –INDICATOR LIGHT LEFT
- –INDICATOR LIGHT RIGHT
- –ACCY ON TILL KEY REMOVED
- ✓ACCY ON TILL DOORS OPENED
- ✓ALARM ARMED
- –SEAT BELT DRIVER
- –SEAT BELT PASSENGER
- –CENTRAL DOOR LOCK
Comments
- 1Reverse needs dials B5 – on B5 only the reverse output works.
- 2Front doors are reversed – driver door = front left signal.
Sportage
2025 on
Requires rev. date 080425 or later
Pre-programmed outputs
| Function | Output |
|---|---|
| Park lights | 12 V+ (300 mA) |
| Low beam headlights | 12 V+ (300 mA) |
| High beam | 12 V+ (300 mA) |
- CAN connection: Rear of the BCM / fuse box, driver side right of the steering wheel – black 32-pin connector. Red pin 17 = CAN-H, Blue pin 16 = CAN-L.
View programmable outputs (20)
Tested on this vehicle and available by custom programming via PC with the 1403-PRG programmer (sold separately) or on request. ✓ Available – Not available
- ✓CAR LOCKING BY RKE/AUTOCLOSE
- –CAR LOCKING BY MECH. KEY
- –UNLOCK TRUNK BY RKE
- –AUTOCLOSE
- –CAR UNLOCKING BY MECH. KEY
- ✓IGNITION KEY ON
- ✓CAR LOCK BY RKE
- ✓CAR UNLOCKING BY RKE
- ✓PARKING LIGHTS
- ✓LOW BEAM LIGHTS
- ✓HIGH BEAM LIGHTS
- –PARKING BRAKE
- ✓FOOT BRAKE
- ✓REVERSE GEAR1
- ✓CAR STATUS LOCKED
- ✓DOOR FRONT LEFT2
- ✓DOOR REAR LEFT
- ✓DOOR FRONT RIGHT2
- ✓DOOR REAR RIGHT
- ✓HOOD
- ✓TRUNK
- –TRUNK WINDOW
- ✓DOORS + HOOD
- ✓INHIBITION TIMER
- –INDICATOR LIGHTS
- –INDICATOR LIGHT LEFT
- –INDICATOR LIGHT RIGHT
- –ACCY ON TILL KEY REMOVED
- ✓ACCY ON TILL DOORS OPENED
- ✓ALARM ARMED
- –SEAT BELT DRIVER
- –SEAT BELT PASSENGER
- –CENTRAL DOOR LOCK
Comments
- 1Reverse needs dials B5 – on B5 only the reverse output works.
- 2Front doors are reversed – driver door = front left signal.
Sorento
2023 (MY24) on
Requires rev. date 080425 or later
Pre-programmed outputs
| Function | Output |
|---|---|
| Park lights | 12 V+ (300 mA) |
| Low beam headlights | 12 V+ (300 mA) |
| High beam | 12 V+ (300 mA) |
- CAN connection: Rear of the BCM / fuse box, driver side right of the steering wheel – black 32-pin connector. Red pin 17 = CAN-H, Blue pin 16 = CAN-L.
View programmable outputs (22)
Tested on this vehicle and available by custom programming via PC with the 1403-PRG programmer (sold separately) or on request. ✓ Available – Not available
- ✓CAR LOCKING BY RKE/AUTOCLOSE
- –CAR LOCKING BY MECH. KEY
- ✓UNLOCK TRUNK BY RKE
- ✓AUTOCLOSE
- –CAR UNLOCKING BY MECH. KEY
- ✓IGNITION KEY ON
- ✓CAR LOCK BY RKE
- ✓CAR UNLOCKING BY RKE
- ✓PARKING LIGHTS
- ✓LOW BEAM LIGHTS
- ✓HIGH BEAM LIGHTS
- –PARKING BRAKE
- ✓FOOT BRAKE
- ✓REVERSE GEAR1
- ✓CAR STATUS LOCKED
- ✓DOOR FRONT LEFT2
- ✓DOOR REAR LEFT
- ✓DOOR FRONT RIGHT2
- ✓DOOR REAR RIGHT
- ✓HOOD
- ✓TRUNK
- –TRUNK WINDOW
- ✓DOORS + HOOD
- ✓INHIBITION TIMER
- –INDICATOR LIGHTS
- –INDICATOR LIGHT LEFT
- –INDICATOR LIGHT RIGHT
- –ACCY ON TILL KEY REMOVED
- ✓ACCY ON TILL DOORS OPENED
- ✓ALARM ARMED
- –SEAT BELT DRIVER
- –SEAT BELT PASSENGER
- –CENTRAL DOOR LOCK
Comments
- 1Reverse needs dials B5 – on B5 only the reverse output works.
- 2Front doors are reversed – driver door = front left signal.
Land Rover 1 vehicle
Defender
2019 – 2023
High beam only on this vehicle – park lights and low beam are not available.
Pre-programmed outputs
| Function | Output |
|---|---|
| High beam | 12 V+ (300 mA) |
- CAN connection: Driver side.
View programmable outputs (22)
Tested on this vehicle and available by custom programming via PC with the 1403-PRG programmer (sold separately) or on request. ✓ Available – Not available
- ✓CAR LOCKING BY RKE/AUTOCLOSE
- –CAR LOCKING BY MECH. KEY
- ✓UNLOCK TRUNK BY RKE
- –AUTOCLOSE
- –CAR UNLOCKING BY MECH. KEY
- ✓IGNITION KEY ON
- ✓CAR LOCK BY RKE
- ✓CAR UNLOCKING BY RKE
- –PARKING LIGHTS
- –LOW BEAM LIGHTS
- ✓HIGH BEAM LIGHTS
- ✓PARKING BRAKE
- ✓FOOT BRAKE
- ✓REVERSE GEAR
- ✓CAR STATUS LOCKED
- ✓DOOR FRONT LEFT1
- ✓DOOR REAR LEFT2
- ✓DOOR FRONT RIGHT1
- ✓DOOR REAR RIGHT2
- ✓HOOD
- –TRUNK
- –TRUNK WINDOW
- ✓DOORS + HOOD
- ✓INHIBITION TIMER
- ✓INDICATOR LIGHTS
- ✓INDICATOR LIGHT LEFT
- ✓INDICATOR LIGHT RIGHT
- –ACCY ON TILL KEY REMOVED
- ✓ACCY ON TILL DOORS OPENED
- ✓ALARM ARMED
- –SEAT BELT DRIVER
- –SEAT BELT PASSENGER
- –CENTRAL DOOR LOCK
Comments
- 1Front doors are reversed.
- 2The car we tested was only a 3 door.
Lexus 2 vehicles
GX550
2024 on
Pre-programmed outputs
| Function | Output |
|---|---|
| Park lights | 12 V+ (300 mA) |
| Low beam headlights | 12 V+ (300 mA) |
| High beam | 12 V+ (300 mA) |
- CAN connection: Behind the glove box on the passenger side – top connector of the Certification Unit, or Driver side, next to the steering wheel – lower connector of the BCM.
View programmable outputs (25)
Tested on this vehicle and available by custom programming via PC with the 1403-PRG programmer (sold separately) or on request. ✓ Available – Not available
- ✓CAR LOCKING BY RKE/AUTOCLOSE
- –CAR LOCKING BY MECH. KEY
- –UNLOCK TRUNK BY RKE
- –AUTOCLOSE
- –CAR UNLOCKING BY MECH. KEY
- ✓IGNITION KEY ON
- ✓CAR LOCK BY RKE
- ✓CAR UNLOCKING BY RKE
- ✓PARKING LIGHTS
- ✓LOW BEAM LIGHTS
- ✓HIGH BEAM LIGHTS
- ✓PARKING BRAKE
- ✓FOOT BRAKE
- ✓REVERSE GEAR
- ✓CAR STATUS LOCKED
- ✓DOOR FRONT LEFT1
- ✓DOOR REAR LEFT1
- ✓DOOR FRONT RIGHT1
- ✓DOOR REAR RIGHT1
- ✓HOOD
- ✓TRUNK
- –TRUNK WINDOW
- ✓DOORS + HOOD
- –INHIBITION TIMER
- ✓INDICATOR LIGHTS2
- ✓INDICATOR LIGHT LEFT2
- ✓INDICATOR LIGHT RIGHT2
- –ACCY ON TILL KEY REMOVED
- ✓ACCY ON TILL DOORS OPENED
- ✓ALARM ARMED
- ✓SEAT BELT DRIVER
- ✓SEAT BELT PASSENGER
- –CENTRAL DOOR LOCK
Comments
- 1Front and rear doors are reversed – driver door = front left signal.
- 2Indicators are solid and do not flash
NX Series
2022 on
Pre-programmed outputs
| Function | Output |
|---|---|
| Park lights | 12 V+ (300 mA) |
| Low beam headlights | 12 V+ (300 mA) |
| High beam | 12 V+ (300 mA) |
- CAN connection: Certification Unit – passenger side, or Gateway – driver side next to the steering wheel.
View programmable outputs (3)
Tested on this vehicle and available by custom programming via PC with the 1403-PRG programmer (sold separately) or on request. ✓ Available – Not available
- –CAR LOCKING BY RKE/AUTOCLOSE
- –CAR LOCKING BY MECH. KEY
- –UNLOCK TRUNK BY RKE
- –AUTOCLOSE
- –CAR UNLOCKING BY MECH. KEY
- –IGNITION KEY ON
- –CAR LOCK BY RKE
- –CAR UNLOCKING BY RKE
- ✓PARKING LIGHTS
- ✓LOW BEAM LIGHTS
- ✓HIGH BEAM LIGHTS
- –PARKING BRAKE
- –FOOT BRAKE
- –REVERSE GEAR
- –CAR STATUS LOCKED
- –DOOR FRONT LEFT
- –DOOR REAR LEFT
- –DOOR FRONT RIGHT
- –DOOR REAR RIGHT
- –HOOD
- –TRUNK
- –TRUNK WINDOW
- –DOORS + HOOD
- –INHIBITION TIMER
- –INDICATOR LIGHTS
- –INDICATOR LIGHT LEFT
- –INDICATOR LIGHT RIGHT
- –ACCY ON TILL KEY REMOVED
- –ACCY ON TILL DOORS OPENED
- –ALARM ARMED
- –SEAT BELT DRIVER
- –SEAT BELT PASSENGER
- –CENTRAL DOOR LOCK
Mazda 1 vehicle
BT-50
2021 on
Requires rev. date 120225 or later
High beam only on this vehicle – park lights and low beam are not available.
Pre-programmed outputs
| Function | Output |
|---|---|
| High beam | 12 V+ (300 mA) |
- CAN connection: Driver side kick panel – grey connector behind the kick panel.
View programmable outputs (24)
Tested on this vehicle and available by custom programming via PC with the 1403-PRG programmer (sold separately) or on request. ✓ Available – Not available
- ✓CAR LOCKING BY RKE/AUTOCLOSE
- –CAR LOCKING BY MECH. KEY
- –UNLOCK TRUNK BY RKE
- –AUTOCLOSE
- –CAR UNLOCKING BY MECH. KEY
- ✓IGNITION KEY ON
- ✓CAR LOCK BY RKE
- ✓CAR UNLOCKING BY RKE
- ✓PARKING LIGHTS
- ✓LOW BEAM LIGHTS
- ✓HIGH BEAM LIGHTS
- ✓PARKING BRAKE1
- ✓FOOT BRAKE
- ✓REVERSE GEAR
- ✓CAR STATUS LOCKED
- ✓DOOR FRONT LEFT2
- ✓DOOR REAR LEFT
- ✓DOOR FRONT RIGHT2
- ✓DOOR REAR RIGHT
- –HOOD
- –TRUNK
- –TRUNK WINDOW
- ✓DOORS + HOOD3
- ✓INHIBITION TIMER
- ✓INDICATOR LIGHTS
- ✓INDICATOR LIGHT LEFT4
- ✓INDICATOR LIGHT RIGHT4
- –ACCY ON TILL KEY REMOVED
- ✓ACCY ON TILL DOORS OPENED
- ✓ALARM ARMED
- ✓SEAT BELT DRIVER
- ✓SEAT BELT PASSENGER
- –CENTRAL DOOR LOCK
Comments
- 1Park brake output remembers its last status.
- 2Front doors are reversed – driver door = front left signal.
- 3Hood is not included in Doors + hood.
- 4Indicators are reversed and the output flashes with the indicator.
Mercedes-Benz 2 vehicles
Sprinter W907 – W910 SWB
2018 on
Pre-programmed outputs
| Function | Output |
|---|---|
| Park lights | 12 V+ (300 mA) |
| Low beam headlights | 12 V+ (300 mA) |
| High beam | 12 V+ (300 mA) |
- Short wheel base.
- CAN connection: Passenger side.
View programmable outputs (17)
Tested on this vehicle and available by custom programming via PC with the 1403-PRG programmer (sold separately) or on request. ✓ Available – Not available
- –CAR LOCKING BY RKE/AUTOCLOSE
- –CAR LOCKING BY MECH. KEY
- –UNLOCK TRUNK BY RKE
- –AUTOCLOSE
- –CAR UNLOCKING BY MECH. KEY
- ✓IGNITION KEY ON
- –CAR LOCK BY RKE
- –CAR UNLOCKING BY RKE
- ✓PARKING LIGHTS
- ✓LOW BEAM LIGHTS
- ✓HIGH BEAM LIGHTS
- ✓PARKING BRAKE
- ✓FOOT BRAKE
- ✓REVERSE GEAR
- –CAR STATUS LOCKED
- ✓DOOR FRONT LEFT
- ✓DOOR REAR LEFT
- ✓DOOR FRONT RIGHT
- ✓DOOR REAR RIGHT
- ✓HOOD
- –TRUNK
- –TRUNK WINDOW
- ✓DOORS + HOOD
- –INHIBITION TIMER
- ✓INDICATOR LIGHTS
- ✓INDICATOR LIGHT LEFT
- ✓INDICATOR LIGHT RIGHT
- –ACCY ON TILL KEY REMOVED
- ✓ACCY ON TILL DOORS OPENED
- –ALARM ARMED
- –SEAT BELT DRIVER
- –SEAT BELT PASSENGER
- –CENTRAL DOOR LOCK
Sprinter W907 – W910 LWB
2018 on
Pre-programmed outputs
| Function | Output |
|---|---|
| Park lights | 12 V+ (300 mA) |
| Low beam headlights | 12 V+ (300 mA) |
| High beam | 12 V+ (300 mA) |
- Long wheel base.
- CAN connection: Passenger side.
View programmable outputs (17)
Tested on this vehicle and available by custom programming via PC with the 1403-PRG programmer (sold separately) or on request. ✓ Available – Not available
- –CAR LOCKING BY RKE/AUTOCLOSE
- –CAR LOCKING BY MECH. KEY
- –UNLOCK TRUNK BY RKE
- –AUTOCLOSE
- –CAR UNLOCKING BY MECH. KEY
- ✓IGNITION KEY ON
- –CAR LOCK BY RKE
- –CAR UNLOCKING BY RKE
- ✓PARKING LIGHTS
- ✓LOW BEAM LIGHTS
- ✓HIGH BEAM LIGHTS
- ✓PARKING BRAKE
- ✓FOOT BRAKE
- ✓REVERSE GEAR
- –CAR STATUS LOCKED
- ✓DOOR FRONT LEFT
- ✓DOOR REAR LEFT
- ✓DOOR FRONT RIGHT
- ✓DOOR REAR RIGHT
- ✓HOOD
- –TRUNK
- –TRUNK WINDOW
- ✓DOORS + HOOD
- –INHIBITION TIMER
- ✓INDICATOR LIGHTS
- ✓INDICATOR LIGHT LEFT
- ✓INDICATOR LIGHT RIGHT
- –ACCY ON TILL KEY REMOVED
- ✓ACCY ON TILL DOORS OPENED
- –ALARM ARMED
- –SEAT BELT DRIVER
- –SEAT BELT PASSENGER
- –CENTRAL DOOR LOCK
Mitsubishi 3 vehicles
Outlander
2021 – 2024 (MY24)
Requires rev. date 071123 or later
Pre-programmed outputs
| Function | Output |
|---|---|
| Park lights | 12 V+ (300 mA) |
| Low beam headlights | 12 V+ (300 mA) |
| High beam | 12 V+ (300 mA) |
- CAN connection: Passenger side footwell – door sill wiring loom.
View programmable outputs
Programmable outputs have not been confirmed for this vehicle yet – contact our technical support team.
Outlander
2025 on (MY25)
Requires rev. date 140825 or later
Pre-programmed outputs
| Function | Output |
|---|---|
| Park lights | 12 V+ (300 mA) |
| Low beam headlights | 12 V+ (300 mA) |
| High beam | 12 V+ (300 mA) |
- Facelift model with digital dash.
- CAN connection: Driver side kick panel – wiring loom behind the kick panel, or Passenger side kick panel.
View programmable outputs (25)
Tested on this vehicle and available by custom programming via PC with the 1403-PRG programmer (sold separately) or on request. ✓ Available – Not available
- ✓CAR LOCKING BY RKE/AUTOCLOSE
- –CAR LOCKING BY MECH. KEY
- –UNLOCK TRUNK BY RKE
- –AUTOCLOSE
- –CAR UNLOCKING BY MECH. KEY
- ✓IGNITION KEY ON
- ✓CAR LOCK BY RKE
- ✓CAR UNLOCKING BY RKE
- ✓PARKING LIGHTS
- ✓LOW BEAM LIGHTS
- ✓HIGH BEAM LIGHTS
- ✓PARKING BRAKE1
- ✓FOOT BRAKE
- ✓REVERSE GEAR
- ✓CAR STATUS LOCKED
- ✓DOOR FRONT LEFT2
- ✓DOOR REAR LEFT
- ✓DOOR FRONT RIGHT2
- ✓DOOR REAR RIGHT
- ✓HOOD
- ✓TRUNK
- –TRUNK WINDOW
- ✓DOORS + HOOD
- ✓INHIBITION TIMER
- ✓INDICATOR LIGHTS
- ✓INDICATOR LIGHT LEFT3
- ✓INDICATOR LIGHT RIGHT3
- –ACCY ON TILL KEY REMOVED
- ✓ACCY ON TILL DOORS OPENED
- ✓ALARM ARMED
- –SEAT BELT DRIVER
- –SEAT BELT PASSENGER
- ✓CENTRAL DOOR LOCK
Comments
- 1Not available with car off
- 2Front doors are reversed – driver door = front left signal.
- 3Output flashes with the indicator.
Triton (All-New)
2024 on
Pre-programmed outputs
| Function | Output |
|---|---|
| Park lights | 12 V+ (300 mA) |
| Low beam headlights | 12 V+ (300 mA) |
| High beam | 12 V+ (300 mA) |
- CAN connection: Driver side.
View programmable outputs (20)
Tested on this vehicle and available by custom programming via PC with the 1403-PRG programmer (sold separately) or on request. ✓ Available – Not available
- ✓CAR LOCKING BY RKE/AUTOCLOSE
- –CAR LOCKING BY MECH. KEY
- –UNLOCK TRUNK BY RKE
- –AUTOCLOSE
- –CAR UNLOCKING BY MECH. KEY
- ✓IGNITION KEY ON
- ✓CAR LOCK BY RKE
- ✓CAR UNLOCKING BY RKE
- ✓PARKING LIGHTS
- ✓LOW BEAM LIGHTS
- ✓HIGH BEAM LIGHTS
- ✓PARKING BRAKE
- ✓FOOT BRAKE
- ✓REVERSE GEAR
- –CAR STATUS LOCKED
- ✓DOOR FRONT LEFT1
- ✓DOOR REAR LEFT
- ✓DOOR FRONT RIGHT1
- ✓DOOR REAR RIGHT
- ✓HOOD
- –TRUNK
- –TRUNK WINDOW
- ✓DOORS + HOOD
- –INHIBITION TIMER
- ✓INDICATOR LIGHTS
- ✓INDICATOR LIGHT LEFT
- ✓INDICATOR LIGHT RIGHT
- –ACCY ON TILL KEY REMOVED
- ✓ACCY ON TILL DOORS OPENED
- –ALARM ARMED
- –SEAT BELT DRIVER
- –SEAT BELT PASSENGER
- –CENTRAL DOOR LOCK
Comments
- 1Doors are reversed.
Nissan 2 vehicles
X-Trail T33
2023 on
Requires rev. date 180924 or later
Pre-programmed outputs
| Function | Output |
|---|---|
| Park lights | 12 V+ (300 mA) |
| Low beam headlights | 12 V+ (300 mA) |
| High beam | 12 V+ (300 mA) |
- CAN connection: Passenger side – wiring loom above the footwell (harness to the BCM behind the glove box).
View programmable outputs (23)
Tested on this vehicle and available by custom programming via PC with the 1403-PRG programmer (sold separately) or on request. ✓ Available – Not available
- ✓CAR LOCKING BY RKE/AUTOCLOSE
- –CAR LOCKING BY MECH. KEY
- –UNLOCK TRUNK BY RKE
- –AUTOCLOSE
- –CAR UNLOCKING BY MECH. KEY
- ✓IGNITION KEY ON
- ✓CAR LOCK BY RKE
- ✓CAR UNLOCKING BY RKE
- ✓PARKING LIGHTS
- ✓LOW BEAM LIGHTS
- ✓HIGH BEAM LIGHTS
- ✓PARKING BRAKE
- ✓FOOT BRAKE
- ✓REVERSE GEAR
- ✓CAR STATUS LOCKED
- ✓DOOR FRONT LEFT1
- ✓DOOR REAR LEFT
- ✓DOOR FRONT RIGHT1
- ✓DOOR REAR RIGHT
- ✓HOOD
- –TRUNK
- –TRUNK WINDOW
- ✓DOORS + HOOD
- ✓INHIBITION TIMER
- ✓INDICATOR LIGHTS
- ✓INDICATOR LIGHT LEFT
- ✓INDICATOR LIGHT RIGHT
- –ACCY ON TILL KEY REMOVED
- ✓ACCY ON TILL DOORS OPENED
- ✓ALARM ARMED
- –SEAT BELT DRIVER
- –SEAT BELT PASSENGER
- –CENTRAL DOOR LOCK
Comments
- 1Front doors are reversed – driver door = front left signal.
Navara D27
2026 on
Pre-programmed outputs
| Function | Output |
|---|---|
| Park lights | 12 V+ (300 mA) |
| Low beam headlights | 12 V+ (300 mA) |
| High beam | 12 V+ (300 mA) |
- CAN connection: Driver side.
View programmable outputs (22)
Tested on this vehicle and available by custom programming via PC with the 1403-PRG programmer (sold separately) or on request. ✓ Available – Not available
- ✓CAR LOCKING BY RKE/AUTOCLOSE
- –CAR LOCKING BY MECH. KEY
- –UNLOCK TRUNK BY RKE
- –AUTOCLOSE
- –CAR UNLOCKING BY MECH. KEY
- ✓IGNITION KEY ON
- ✓CAR LOCK BY RKE
- ✓CAR UNLOCKING BY RKE
- ✓PARKING LIGHTS
- ✓LOW BEAM LIGHTS
- ✓HIGH BEAM LIGHTS
- ✓PARKING BRAKE
- ✓FOOT BRAKE
- ✓REVERSE GEAR
- ✓CAR STATUS LOCKED
- ✓DOOR FRONT LEFT1
- ✓DOOR REAR LEFT
- ✓DOOR FRONT RIGHT1
- ✓DOOR REAR RIGHT
- ✓HOOD
- –TRUNK
- –TRUNK WINDOW
- ✓DOORS + HOOD
- –INHIBITION TIMER
- ✓INDICATOR LIGHTS
- ✓INDICATOR LIGHT LEFT
- ✓INDICATOR LIGHT RIGHT
- –ACCY ON TILL KEY REMOVED
- ✓ACCY ON TILL DOORS OPENED
- ✓ALARM ARMED
- –SEAT BELT DRIVER
- –SEAT BELT PASSENGER
- –CENTRAL DOOR LOCK
Comments
- 1Front doors are reversed. Rear doors are correct.
RAM 2 vehicles
DJ 2500 / 3500
2019 – 2024
Pre-programmed outputs
| Function | Output |
|---|---|
| Park lights | 12 V+ (300 mA) |
| Low beam headlights | 12 V+ (300 mA) |
| High beam | 12 V+ (300 mA) |
- CAN connection: Passenger side.
View programmable outputs (15)
Tested on this vehicle and available by custom programming via PC with the 1403-PRG programmer (sold separately) or on request. ✓ Available – Not available
- ✓CAR LOCKING BY RKE/AUTOCLOSE
- –CAR LOCKING BY MECH. KEY
- –UNLOCK TRUNK BY RKE
- –AUTOCLOSE
- –CAR UNLOCKING BY MECH. KEY
- ✓IGNITION KEY ON
- –CAR LOCK BY RKE
- –CAR UNLOCKING BY RKE
- ✓PARKING LIGHTS
- ✓LOW BEAM LIGHTS
- ✓HIGH BEAM LIGHTS
- ✓PARKING BRAKE
- ✓FOOT BRAKE
- ✓REVERSE GEAR
- –CAR STATUS LOCKED
- ✓DOOR FRONT LEFT1
- ✓DOOR REAR LEFT
- ✓DOOR FRONT RIGHT1
- ✓DOOR REAR RIGHT
- –HOOD
- –TRUNK
- –TRUNK WINDOW
- –DOORS + HOOD
- –INHIBITION TIMER
- –INDICATOR LIGHTS
- ✓INDICATOR LIGHT LEFT2
- ✓INDICATOR LIGHT RIGHT2
- –ACCY ON TILL KEY REMOVED
- ✓ACCY ON TILL DOORS OPENED
- –ALARM ARMED
- –SEAT BELT DRIVER
- –SEAT BELT PASSENGER
- –CENTRAL DOOR LOCK
Comments
- 1Front left and right doors are reversed but the rear doors are correct.
- 2Output flashes with indicator.
DT 1500
2019 – 2024
Pre-programmed outputs
| Function | Output |
|---|---|
| Park lights | 12 V+ (300 mA) |
| Low beam headlights | 12 V+ (300 mA) |
| High beam | 12 V+ (300 mA) |
- CAN connection: Passenger side.
View programmable outputs (19)
Tested on this vehicle and available by custom programming via PC with the 1403-PRG programmer (sold separately) or on request. ✓ Available – Not available
- ✓CAR LOCKING BY RKE/AUTOCLOSE
- –CAR LOCKING BY MECH. KEY
- –UNLOCK TRUNK BY RKE
- –AUTOCLOSE
- –CAR UNLOCKING BY MECH. KEY
- ✓IGNITION KEY ON
- ✓CAR LOCK BY RKE
- ✓CAR UNLOCKING BY RKE
- ✓PARKING LIGHTS
- ✓LOW BEAM LIGHTS
- ✓HIGH BEAM LIGHTS
- –PARKING BRAKE
- ✓FOOT BRAKE
- ✓REVERSE GEAR
- ✓CAR STATUS LOCKED
- ✓DOOR FRONT LEFT1
- ✓DOOR REAR LEFT
- ✓DOOR FRONT RIGHT1
- ✓DOOR REAR RIGHT
- –HOOD
- –TRUNK
- –TRUNK WINDOW
- –DOORS + HOOD
- ✓INHIBITION TIMER
- ✓INDICATOR LIGHTS
- ✓INDICATOR LIGHT LEFT2
- ✓INDICATOR LIGHT RIGHT2
- –ACCY ON TILL KEY REMOVED
- ✓ACCY ON TILL DOORS OPENED
- –ALARM ARMED
- –SEAT BELT DRIVER
- –SEAT BELT PASSENGER
- –CENTRAL DOOR LOCK
Comments
- 1Front left and right doors are reversed but the rear doors are correct.
- 2Output flashes with indicator.
Subaru 5 vehicles
Forester S5
2021 – 2025
Pre-programmed outputs
| Function | Output |
|---|---|
| Park lights | 12 V+ (300 mA) |
| Low beam headlights | 12 V+ (300 mA) |
| High beam | 12 V+ (300 mA) |
- CAN connection: Driver side.
View programmable outputs
Programmable outputs have not been confirmed for this vehicle yet – contact our technical support team.
Impreza (incl. WRX)
2023 – 2026
Requires rev. date 230326 or later
Pre-programmed outputs
| Function | Output |
|---|---|
| Park lights | 12 V+ (300 mA) |
| Low beam headlights | 12 V+ (300 mA) |
| High beam | 12 V+ (300 mA) |
- CAN connection: see the installation manual supplied with the module.
View programmable outputs (20)
Tested on this vehicle and available by custom programming via PC with the 1403-PRG programmer (sold separately) or on request. ✓ Available – Not available
- ✓CAR LOCKING BY RKE/AUTOCLOSE
- –CAR LOCKING BY MECH. KEY
- –UNLOCK TRUNK BY RKE
- –AUTOCLOSE
- –CAR UNLOCKING BY MECH. KEY
- ✓IGNITION KEY ON
- ✓CAR LOCK BY RKE
- ✓CAR UNLOCKING BY RKE
- ✓PARKING LIGHTS
- ✓LOW BEAM LIGHTS
- ✓HIGH BEAM LIGHTS
- ✓PARKING BRAKE
- ✓FOOT BRAKE
- –REVERSE GEAR
- ✓CAR STATUS LOCKED
- ✓DOOR FRONT LEFT1
- ✓DOOR REAR LEFT2
- ✓DOOR FRONT RIGHT1
- ✓DOOR REAR RIGHT2
- ✓HOOD
- –TRUNK
- –TRUNK WINDOW
- ✓DOORS + HOOD
- –INHIBITION TIMER
- –INDICATOR LIGHTS
- ✓INDICATOR LIGHT LEFT3
- ✓INDICATOR LIGHT RIGHT3
- –ACCY ON TILL KEY REMOVED
- ✓ACCY ON TILL DOORS OPENED
- ✓ALARM ARMED
- –SEAT BELT DRIVER
- –SEAT BELT PASSENGER
- –CENTRAL DOOR LOCK
Comments
- 1Front door outputs are reversed.
- 2Rear door outputs are reversed.
- 3Output flashes with indicator.
Outback (5th gen)
2018 – 2020
Pre-programmed outputs
| Function | Output |
|---|---|
| Park lights | 12 V+ (300 mA) |
| Low beam headlights | 12 V+ (300 mA) |
| High beam | 12 V+ (300 mA) |
- CAN connection: Driver side.
View programmable outputs (22)
Tested on this vehicle and available by custom programming via PC with the 1403-PRG programmer (sold separately) or on request. ✓ Available – Not available
- ✓CAR LOCKING BY RKE/AUTOCLOSE
- –CAR LOCKING BY MECH. KEY
- ✓UNLOCK TRUNK BY RKE
- –AUTOCLOSE
- –CAR UNLOCKING BY MECH. KEY
- ✓IGNITION KEY ON
- ✓CAR LOCK BY RKE
- ✓CAR UNLOCKING BY RKE
- ✓PARKING LIGHTS
- ✓LOW BEAM LIGHTS
- ✓HIGH BEAM LIGHTS
- –PARKING BRAKE
- ✓FOOT BRAKE
- ✓REVERSE GEAR
- –CAR STATUS LOCKED
- ✓DOOR FRONT LEFT1
- ✓DOOR REAR LEFT1
- ✓DOOR FRONT RIGHT1
- ✓DOOR REAR RIGHT1
- ✓HOOD
- ✓TRUNK
- –TRUNK WINDOW
- ✓DOORS + HOOD
- –INHIBITION TIMER
- ✓INDICATOR LIGHTS
- ✓INDICATOR LIGHT LEFT
- ✓INDICATOR LIGHT RIGHT
- –ACCY ON TILL KEY REMOVED
- ✓ACCY ON TILL DOORS OPENED
- ✓ALARM ARMED
- –SEAT BELT DRIVER
- –SEAT BELT PASSENGER
- –CENTRAL DOOR LOCK
Comments
- 1Front and rear doors are reversed.
Outback (6th gen)
2021 – 2025
Requires rev. date 230326 or later
Pre-programmed outputs
| Function | Output |
|---|---|
| Park lights | 12 V+ (300 mA) |
| Low beam headlights | 12 V+ (300 mA) |
| High beam | 12 V+ (300 mA) |
- CAN connection: see the installation manual supplied with the module.
View programmable outputs (22)
Tested on this vehicle and available by custom programming via PC with the 1403-PRG programmer (sold separately) or on request. ✓ Available – Not available
- ✓CAR LOCKING BY RKE/AUTOCLOSE
- –CAR LOCKING BY MECH. KEY
- –UNLOCK TRUNK BY RKE
- –AUTOCLOSE
- –CAR UNLOCKING BY MECH. KEY
- ✓IGNITION KEY ON
- ✓CAR LOCK BY RKE
- ✓CAR UNLOCKING BY RKE
- ✓PARKING LIGHTS
- ✓LOW BEAM LIGHTS
- ✓HIGH BEAM LIGHTS
- ✓PARKING BRAKE
- ✓FOOT BRAKE
- –REVERSE GEAR
- ✓CAR STATUS LOCKED
- ✓DOOR FRONT LEFT1
- ✓DOOR REAR LEFT1
- ✓DOOR FRONT RIGHT1
- ✓DOOR REAR RIGHT1
- –HOOD
- ✓TRUNK
- –TRUNK WINDOW
- ✓DOORS + HOOD
- ✓INHIBITION TIMER
- ✓INDICATOR LIGHTS
- ✓INDICATOR LIGHT LEFT
- ✓INDICATOR LIGHT RIGHT
- –ACCY ON TILL KEY REMOVED
- ✓ACCY ON TILL DOORS OPENED
- ✓ALARM ARMED
- –SEAT BELT DRIVER
- –SEAT BELT PASSENGER
- –CENTRAL DOOR LOCK
Comments
- 1Front and rear doors are reversed.
Forester (All-New)
2025 on
Requires rev. date 180924 or later
Pre-programmed outputs
| Function | Output |
|---|---|
| Park lights | 12 V+ (300 mA) |
| Low beam headlights | 12 V+ (300 mA) |
| High beam | 12 V+ (300 mA) |
- CAN connection: Driver side footwell (kick panel) – white connector. White = CAN-H, Black = CAN-L.
View programmable outputs (24)
Tested on this vehicle and available by custom programming via PC with the 1403-PRG programmer (sold separately) or on request. ✓ Available – Not available
- ✓CAR LOCKING BY RKE/AUTOCLOSE
- –CAR LOCKING BY MECH. KEY
- ✓UNLOCK TRUNK BY RKE
- –AUTOCLOSE
- –CAR UNLOCKING BY MECH. KEY
- ✓IGNITION KEY ON
- ✓CAR LOCK BY RKE
- ✓CAR UNLOCKING BY RKE
- ✓PARKING LIGHTS
- ✓LOW BEAM LIGHTS
- ✓HIGH BEAM LIGHTS1
- ✓PARKING BRAKE1
- ✓FOOT BRAKE
- –REVERSE GEAR
- ✓CAR STATUS LOCKED
- ✓DOOR FRONT LEFT2
- ✓DOOR REAR LEFT2
- ✓DOOR FRONT RIGHT2
- ✓DOOR REAR RIGHT2
- ✓HOOD
- ✓TRUNK
- –TRUNK WINDOW
- ✓DOORS + HOOD
- ✓INHIBITION TIMER
- ✓INDICATOR LIGHTS3
- ✓INDICATOR LIGHT LEFT4
- ✓INDICATOR LIGHT RIGHT4
- –ACCY ON TILL KEY REMOVED
- ✓ACCY ON TILL DOORS OPENED
- ✓ALARM ARMED
- –SEAT BELT DRIVER
- –SEAT BELT PASSENGER
- –CENTRAL DOOR LOCK
Comments
- 1Not available with car off or ACC.
- 2Doors are reversed – driver door = front left signal.
- 3Output flashes with indicator.
- 4Not available with car off or ACC. Output flashes with indicator.
Toyota 14 vehicles
Camry
2018 – 2024
Pre-programmed outputs
| Function | Output |
|---|---|
| Park lights | 12 V+ (300 mA) |
| Low beam headlights | 12 V+ (300 mA) |
| High beam | 12 V+ (300 mA) |
- CAN connection: Passenger side.
View programmable outputs
Programmable outputs have not been confirmed for this vehicle yet – contact our technical support team.
Coaster Bus
2025 on
Pre-programmed outputs
| Function | Output |
|---|---|
| Park lights | 12 V+ (300 mA) |
| Low beam headlights | 12 V+ (300 mA) |
| High beam | 12 V+ (300 mA) |
- CAN connection: Behind the instrument cluster – white 40-pin connector.
View programmable outputs
Programmable outputs have not been confirmed for this vehicle yet – contact our technical support team.
Hiace
2025 on
Pre-programmed outputs
| Function | Output |
|---|---|
| Park lights | 12 V+ (300 mA) |
| Low beam headlights | 12 V+ (300 mA) |
| High beam | 12 V+ (300 mA) |
- CAN connection: Blue 22-pin plug in the driver side kick panel.
View programmable outputs (28)
Tested on this vehicle and available by custom programming via PC with the 1403-PRG programmer (sold separately) or on request. ✓ Available – Not available
- ✓CAR LOCKING BY RKE/AUTOCLOSE
- ✓CAR LOCKING BY MECH. KEY
- –UNLOCK TRUNK BY RKE
- –AUTOCLOSE
- ✓CAR UNLOCKING BY MECH. KEY
- ✓IGNITION KEY ON
- ✓CAR LOCK BY RKE
- ✓CAR UNLOCKING BY RKE
- ✓PARKING LIGHTS
- ✓LOW BEAM LIGHTS
- ✓HIGH BEAM LIGHTS
- ✓PARKING BRAKE
- ✓FOOT BRAKE
- ✓REVERSE GEAR
- ✓CAR STATUS LOCKED
- ✓DOOR FRONT LEFT1
- ✓DOOR REAR LEFT
- ✓DOOR FRONT RIGHT1
- ✓DOOR REAR RIGHT
- ✓HOOD
- ✓TRUNK
- –TRUNK WINDOW
- ✓DOORS + HOOD
- ✓INHIBITION TIMER
- ✓INDICATOR LIGHTS2
- ✓INDICATOR LIGHT LEFT2
- ✓INDICATOR LIGHT RIGHT2
- ✓ACCY ON TILL KEY REMOVED
- –ACCY ON TILL DOORS OPENED
- ✓ALARM ARMED
- ✓SEAT BELT DRIVER3
- ✓SEAT BELT PASSENGER3
- –CENTRAL DOOR LOCK
Comments
- 1Front doors are reversed – driver door = front left signal.
- 2Indicator outputs are solid (no flash) – a flasher relay is needed.
- 3Seat belt output works for both driver and passenger seat belts.
Hilux N80
Late 2020 – 2025
Pre-programmed outputs
| Function | Output |
|---|---|
| Park lights | 12 V+ (300 mA) |
| Low beam headlights | 12 V+ (300 mA) |
| High beam | 12 V+ (300 mA) |
- All models.
- CAN connection: Driver side.
View programmable outputs (16)
Tested on this vehicle and available by custom programming via PC with the 1403-PRG programmer (sold separately) or on request. ✓ Available – Not available
- –CAR LOCKING BY RKE/AUTOCLOSE
- –CAR LOCKING BY MECH. KEY
- –UNLOCK TRUNK BY RKE
- –AUTOCLOSE
- –CAR UNLOCKING BY MECH. KEY
- ✓IGNITION KEY ON
- –CAR LOCK BY RKE
- –CAR UNLOCKING BY RKE
- ✓PARKING LIGHTS
- ✓LOW BEAM LIGHTS
- ✓HIGH BEAM LIGHTS
- ✓PARKING BRAKE
- ✓FOOT BRAKE
- ✓REVERSE GEAR
- ✓CAR STATUS LOCKED
- ✓DOOR FRONT LEFT1
- ✓DOOR REAR LEFT2
- ✓DOOR FRONT RIGHT1
- ✓DOOR REAR RIGHT2
- –HOOD
- –TRUNK
- –TRUNK WINDOW
- –DOORS + HOOD
- –INHIBITION TIMER
- –INDICATOR LIGHTS
- ✓INDICATOR LIGHT LEFT3
- ✓INDICATOR LIGHT RIGHT3
- ✓ACCY ON TILL KEY REMOVED
- ✓ACCY ON TILL DOORS OPENED
- –ALARM ARMED
- –SEAT BELT DRIVER
- –SEAT BELT PASSENGER
- –CENTRAL DOOR LOCK
Comments
- 1Front door outputs are reversed.
- 2Rear door outputs are reversed.
- 3Output flashes with indicator.
Hilux N90
2026 on
Pre-programmed outputs
| Function | Output |
|---|---|
| Park lights | 12 V+ (300 mA) |
| Low beam headlights | 12 V+ (300 mA) |
| High beam | 12 V+ (300 mA) |
- All models, including the Hilux EV.
- CAN connection: Behind the instrument cluster – use either the white or the black connector on the back of the cluster.
View programmable outputs (18)
Tested on this vehicle and available by custom programming via PC with the 1403-PRG programmer (sold separately) or on request. ✓ Available – Not available
- –CAR LOCKING BY RKE/AUTOCLOSE
- –CAR LOCKING BY MECH. KEY
- –UNLOCK TRUNK BY RKE
- –AUTOCLOSE
- –CAR UNLOCKING BY MECH. KEY
- ✓IGNITION KEY ON
- –CAR LOCK BY RKE
- –CAR UNLOCKING BY RKE
- ✓PARKING LIGHTS
- ✓LOW BEAM LIGHTS
- ✓HIGH BEAM LIGHTS
- ✓PARKING BRAKE
- ✓FOOT BRAKE
- ✓REVERSE GEAR
- –CAR STATUS LOCKED
- ✓DOOR FRONT LEFT1
- ✓DOOR REAR LEFT1
- ✓DOOR FRONT RIGHT1
- ✓DOOR REAR RIGHT1
- ✓HOOD
- –TRUNK
- –TRUNK WINDOW
- ✓DOORS + HOOD
- –INHIBITION TIMER
- ✓INDICATOR LIGHTS
- ✓INDICATOR LIGHT LEFT
- ✓INDICATOR LIGHT RIGHT
- –ACCY ON TILL KEY REMOVED
- ✓ACCY ON TILL DOORS OPENED
- –ALARM ARMED
- ✓SEAT BELT DRIVER
- –SEAT BELT PASSENGER
- –CENTRAL DOOR LOCK
Comments
- 1Front and rear doors are reversed – driver door = front left signal.
Kluger
MY2021 – 2023
Pre-programmed outputs
| Function | Output |
|---|---|
| Park lights | 12 V+ (300 mA) |
| Low beam headlights | 12 V+ (300 mA) |
| High beam | 12 V+ (300 mA) |
- All models.
- CAN connection: Passenger side.
View programmable outputs (15)
Tested on this vehicle and available by custom programming via PC with the 1403-PRG programmer (sold separately) or on request. ✓ Available – Not available
- –CAR LOCKING BY RKE/AUTOCLOSE
- –CAR LOCKING BY MECH. KEY
- –UNLOCK TRUNK BY RKE
- –AUTOCLOSE
- –CAR UNLOCKING BY MECH. KEY
- ✓IGNITION KEY ON
- –CAR LOCK BY RKE
- –CAR UNLOCKING BY RKE
- ✓PARKING LIGHTS
- ✓LOW BEAM LIGHTS
- ✓HIGH BEAM LIGHTS
- ✓PARKING BRAKE
- ✓FOOT BRAKE
- ✓REVERSE GEAR
- –CAR STATUS LOCKED
- ✓DOOR FRONT LEFT1
- ✓DOOR REAR LEFT1
- ✓DOOR FRONT RIGHT1
- ✓DOOR REAR RIGHT1
- ✓HOOD
- ✓TRUNK
- –TRUNK WINDOW
- –DOORS + HOOD
- –INHIBITION TIMER
- –INDICATOR LIGHTS
- –INDICATOR LIGHT LEFT
- –INDICATOR LIGHT RIGHT
- ✓ACCY ON TILL KEY REMOVED
- ✓ACCY ON TILL DOORS OPENED
- –ALARM ARMED
- –SEAT BELT DRIVER
- –SEAT BELT PASSENGER
- –CENTRAL DOOR LOCK
Comments
- 1Front and rear door outputs are reversed.
Kluger
MY2024 on
Pre-programmed outputs
| Function | Output |
|---|---|
| Park lights | 12 V+ (300 mA) |
| Low beam headlights | 12 V+ (300 mA) |
| High beam | 12 V+ (300 mA) |
- All models.
- CAN connection: Passenger side.
View programmable outputs
Programmable outputs have not been confirmed for this vehicle yet – contact our technical support team.
LandCruiser 300 Series
2021 – 2024
Pre-programmed outputs
| Function | Output |
|---|---|
| Park lights | 12 V+ (300 mA) |
| Low beam headlights | 12 V+ (300 mA) |
| High beam | 12 V+ (300 mA) |
- All models.
- CAN connection: Passenger side kick panel – white 22-pin connector.
View programmable outputs (17)
Tested on this vehicle and available by custom programming via PC with the 1403-PRG programmer (sold separately) or on request. ✓ Available – Not available
- –CAR LOCKING BY RKE/AUTOCLOSE
- –CAR LOCKING BY MECH. KEY
- –UNLOCK TRUNK BY RKE
- –AUTOCLOSE
- –CAR UNLOCKING BY MECH. KEY
- ✓IGNITION KEY ON
- –CAR LOCK BY RKE
- –CAR UNLOCKING BY RKE
- ✓PARKING LIGHTS
- ✓LOW BEAM LIGHTS
- ✓HIGH BEAM LIGHTS
- ✓PARKING BRAKE
- ✓FOOT BRAKE
- ✓REVERSE GEAR
- –CAR STATUS LOCKED
- ✓DOOR FRONT LEFT1
- ✓DOOR REAR LEFT1
- ✓DOOR FRONT RIGHT1
- ✓DOOR REAR RIGHT1
- ✓HOOD
- ✓TRUNK
- –TRUNK WINDOW
- ✓DOORS + HOOD
- –INHIBITION TIMER
- –INDICATOR LIGHTS
- ✓INDICATOR LIGHT LEFT2
- ✓INDICATOR LIGHT RIGHT2
- –ACCY ON TILL KEY REMOVED
- ✓ACCY ON TILL DOORS OPENED
- –ALARM ARMED
- –SEAT BELT DRIVER
- –SEAT BELT PASSENGER
- –CENTRAL DOOR LOCK
Comments
- 1Front and rear doors are reversed – driver door = front left signal.
- 2Indicators are reversed – left output follows the right indicator.
LandCruiser 300 Series
2025 on
Pre-programmed outputs
| Function | Output |
|---|---|
| Park lights | 12 V+ (300 mA) |
| Low beam headlights | 12 V+ (300 mA) |
| High beam | 12 V+ (300 mA) |
- All models.
- CAN connection: Passenger side kick panel. Use the white CAN-L wire directly below the pink CAN-H wire in the connector.
View programmable outputs (18)
Tested on this vehicle and available by custom programming via PC with the 1403-PRG programmer (sold separately) or on request. ✓ Available – Not available
- –CAR LOCKING BY RKE/AUTOCLOSE
- –CAR LOCKING BY MECH. KEY
- –UNLOCK TRUNK BY RKE
- –AUTOCLOSE
- –CAR UNLOCKING BY MECH. KEY
- ✓IGNITION KEY ON
- –CAR LOCK BY RKE
- –CAR UNLOCKING BY RKE
- ✓PARKING LIGHTS
- ✓LOW BEAM LIGHTS
- ✓HIGH BEAM LIGHTS
- ✓PARKING BRAKE
- ✓FOOT BRAKE
- ✓REVERSE GEAR
- –CAR STATUS LOCKED
- ✓DOOR FRONT LEFT1
- ✓DOOR REAR LEFT1
- ✓DOOR FRONT RIGHT1
- ✓DOOR REAR RIGHT1
- –HOOD
- ✓TRUNK
- –TRUNK WINDOW
- ✓DOORS + HOOD
- –INHIBITION TIMER
- –INDICATOR LIGHTS
- ✓INDICATOR LIGHT LEFT
- ✓INDICATOR LIGHT RIGHT
- –ACCY ON TILL KEY REMOVED
- ✓ACCY ON TILL DOORS OPENED
- –ALARM ARMED
- ✓SEAT BELT DRIVER
- ✓SEAT BELT PASSENGER
- –CENTRAL DOOR LOCK
Comments
- 1Front and rear doors are reversed – driver door = front left signal.
Prado 150
Late 2019 – late 2024
Pre-programmed outputs
| Function | Output |
|---|---|
| Park lights | 12 V+ (300 mA) |
| Low beam headlights | 12 V+ (300 mA) |
| High beam | 12 V+ (300 mA) |
- All models with factory Apple CarPlay and Android Auto.
- CAN connection: Passenger side.
View programmable outputs (16)
Tested on this vehicle and available by custom programming via PC with the 1403-PRG programmer (sold separately) or on request. ✓ Available – Not available
- ✓CAR LOCKING BY RKE/AUTOCLOSE
- –CAR LOCKING BY MECH. KEY
- –UNLOCK TRUNK BY RKE
- –AUTOCLOSE
- –CAR UNLOCKING BY MECH. KEY
- ✓IGNITION KEY ON
- ✓CAR LOCK BY RKE
- –CAR UNLOCKING BY RKE
- ✓PARKING LIGHTS
- ✓LOW BEAM LIGHTS
- ✓HIGH BEAM LIGHTS
- ✓PARKING BRAKE
- ✓FOOT BRAKE
- ✓REVERSE GEAR
- ✓CAR STATUS LOCKED
- ✓DOOR FRONT LEFT1
- ✓DOOR REAR LEFT2
- ✓DOOR FRONT RIGHT1
- ✓DOOR REAR RIGHT2
- –HOOD
- –TRUNK
- –TRUNK WINDOW
- –DOORS + HOOD
- –INHIBITION TIMER
- –INDICATOR LIGHTS
- –INDICATOR LIGHT LEFT
- –INDICATOR LIGHT RIGHT
- ✓ACCY ON TILL KEY REMOVED
- ✓ACCY ON TILL DOORS OPENED
- –ALARM ARMED
- –SEAT BELT DRIVER
- –SEAT BELT PASSENGER
- –CENTRAL DOOR LOCK
Comments
- 1Front door outputs are reversed.
- 2Rear door outputs are reversed.
Prado 250 (All-New)
Late 2024 on
Pre-programmed outputs
| Function | Output |
|---|---|
| Park lights | 12 V+ (300 mA) |
| Low beam headlights | 12 V+ (300 mA) |
| High beam | 12 V+ (300 mA) |
- CAN connection: Driver side footwell. There are several white wires in the connector – use the one twisted with the pink wire.
View programmable outputs (20)
Tested on this vehicle and available by custom programming via PC with the 1403-PRG programmer (sold separately) or on request. ✓ Available – Not available
- –CAR LOCKING BY RKE/AUTOCLOSE
- –CAR LOCKING BY MECH. KEY
- –UNLOCK TRUNK BY RKE
- –AUTOCLOSE
- –CAR UNLOCKING BY MECH. KEY
- ✓IGNITION KEY ON
- –CAR LOCK BY RKE
- –CAR UNLOCKING BY RKE
- ✓PARKING LIGHTS
- ✓LOW BEAM LIGHTS
- ✓HIGH BEAM LIGHTS
- ✓PARKING BRAKE
- ✓FOOT BRAKE
- ✓REVERSE GEAR
- –CAR STATUS LOCKED
- ✓DOOR FRONT LEFT1
- ✓DOOR REAR LEFT1
- ✓DOOR FRONT RIGHT1
- ✓DOOR REAR RIGHT1
- ✓HOOD
- ✓TRUNK
- –TRUNK WINDOW
- ✓DOORS + HOOD
- –INHIBITION TIMER
- ✓INDICATOR LIGHTS
- ✓INDICATOR LIGHT LEFT
- ✓INDICATOR LIGHT RIGHT
- –ACCY ON TILL KEY REMOVED
- ✓ACCY ON TILL DOORS OPENED
- –ALARM ARMED
- ✓SEAT BELT DRIVER
- ✓SEAT BELT PASSENGER
- –CENTRAL DOOR LOCK
Comments
- 1Front and rear doors are reversed – driver door = front left signal.
RAV4
2018 – 2025
Pre-programmed outputs
| Function | Output |
|---|---|
| Park lights | 12 V+ (300 mA) |
| Low beam headlights | 12 V+ (300 mA) |
| High beam | 12 V+ (300 mA) |
- All models.
- CAN connection: see the installation manual supplied with the module.
View programmable outputs
Programmable outputs have not been confirmed for this vehicle yet – contact our technical support team.
RAV4 (New)
MY26 on
Pre-programmed outputs
| Function | Output |
|---|---|
| Park lights | 12 V+ (300 mA) |
| Low beam headlights | 12 V+ (300 mA) |
| High beam | 12 V+ (300 mA) |
- All models.
- CAN connection: see the installation manual supplied with the module.
View programmable outputs (17)
Tested on this vehicle and available by custom programming via PC with the 1403-PRG programmer (sold separately) or on request. ✓ Available – Not available
- –CAR LOCKING BY RKE/AUTOCLOSE
- –CAR LOCKING BY MECH. KEY
- –UNLOCK TRUNK BY RKE
- –AUTOCLOSE
- –CAR UNLOCKING BY MECH. KEY
- ✓IGNITION KEY ON
- ✓CAR LOCK BY RKE
- ✓CAR UNLOCKING BY RKE
- ✓PARKING LIGHTS
- ✓LOW BEAM LIGHTS
- ✓HIGH BEAM LIGHTS
- ✓PARKING BRAKE
- ✓FOOT BRAKE
- ✓REVERSE GEAR
- ✓CAR STATUS LOCKED
- ✓DOOR FRONT LEFT1
- ✓DOOR REAR LEFT1
- ✓DOOR FRONT RIGHT1
- ✓DOOR REAR RIGHT1
- –HOOD
- ✓TRUNK
- –TRUNK WINDOW
- ✓DOORS + HOOD
- –INHIBITION TIMER
- –INDICATOR LIGHTS
- –INDICATOR LIGHT LEFT
- –INDICATOR LIGHT RIGHT
- –ACCY ON TILL KEY REMOVED
- ✓ACCY ON TILL DOORS OPENED
- –ALARM ARMED
- –SEAT BELT DRIVER
- –SEAT BELT PASSENGER
- –CENTRAL DOOR LOCK
Comments
- 1Front and rear doors are reversed.
Tundra
2024 on
Pre-programmed outputs
| Function | Output |
|---|---|
| Park lights | 12 V+ (300 mA) |
| Low beam headlights | 12 V+ (300 mA) |
| High beam | 12 V+ (300 mA) |
- CAN connection: Driver side kick panel.
View programmable outputs (26)
Tested on this vehicle and available by custom programming via PC with the 1403-PRG programmer (sold separately) or on request. ✓ Available – Not available
- ✓CAR LOCKING BY RKE/AUTOCLOSE
- –CAR LOCKING BY MECH. KEY
- ✓UNLOCK TRUNK BY RKE
- ✓AUTOCLOSE
- –CAR UNLOCKING BY MECH. KEY
- ✓IGNITION KEY ON
- ✓CAR LOCK BY RKE
- ✓CAR UNLOCKING BY RKE
- ✓PARKING LIGHTS
- ✓LOW BEAM LIGHTS
- ✓HIGH BEAM LIGHTS
- ✓PARKING BRAKE
- ✓FOOT BRAKE
- ✓REVERSE GEAR
- ✓CAR STATUS LOCKED
- ✓DOOR FRONT LEFT1
- ✓DOOR REAR LEFT
- ✓DOOR FRONT RIGHT1
- ✓DOOR REAR RIGHT
- ✓HOOD
- ✓TRUNK2
- –TRUNK WINDOW
- ✓DOORS + HOOD
- ✓INHIBITION TIMER
- ✓INDICATOR LIGHTS
- ✓INDICATOR LIGHT LEFT
- ✓INDICATOR LIGHT RIGHT
- –ACCY ON TILL KEY REMOVED
- ✓ACCY ON TILL DOORS OPENED
- ✓ALARM ARMED
- –SEAT BELT DRIVER
- –SEAT BELT PASSENGER
- –CENTRAL DOOR LOCK
Comments
- 1Front doors are reversed – driver door = front left signal.
- 2Trunk signal shows when the tailgate is opened from the remote.
Volkswagen 2 vehicles
Amarok
2023 on
Requires rev. date 261026 or later
Pre-programmed outputs
| Function | Output |
|---|---|
| Park lights | 12 V+ (300 mA) |
| Low beam headlights | 12 V+ (300 mA) |
| High beam | 12 V+ (300 mA) |
- CAN connection: Driver side footwell, or Passenger side footwell.
View programmable outputs (23)
Tested on this vehicle and available by custom programming via PC with the 1403-PRG programmer (sold separately) or on request. ✓ Available – Not available
- ✓CAR LOCKING BY RKE/AUTOCLOSE
- –CAR LOCKING BY MECH. KEY
- –UNLOCK TRUNK BY RKE
- –AUTOCLOSE
- –CAR UNLOCKING BY MECH. KEY
- ✓IGNITION KEY ON
- ✓CAR LOCK BY RKE
- ✓CAR UNLOCKING BY RKE
- ✓PARKING LIGHTS
- ✓LOW BEAM LIGHTS
- ✓HIGH BEAM LIGHTS1
- ✓PARKING BRAKE1
- ✓FOOT BRAKE
- ✓REVERSE GEAR2
- ✓CAR STATUS LOCKED
- ✓DOOR FRONT LEFT3
- ✓DOOR REAR LEFT
- ✓DOOR FRONT RIGHT3
- ✓DOOR REAR RIGHT
- ✓HOOD
- –TRUNK
- –TRUNK WINDOW
- ✓DOORS + HOOD
- –INHIBITION TIMER
- ✓INDICATOR LIGHTS4
- ✓INDICATOR LIGHT LEFT4
- ✓INDICATOR LIGHT RIGHT4
- –ACCY ON TILL KEY REMOVED
- ✓ACCY ON TILL DOORS OPENED
- ✓ALARM ARMED
- ✓SEAT BELT DRIVER1
- –SEAT BELT PASSENGER
- –CENTRAL DOOR LOCK
Comments
- 1Not available with car off.
- 2Engine on only.
- 3Front doors are reversed – driver door = front left signal.
- 4Not available with car off. Output flashes with indicator.
Touareg CR & RC
2018 on
Pre-programmed outputs
| Function | Output |
|---|---|
| Park lights | 12 V+ (300 mA) |
| Low beam headlights | 12 V+ (300 mA) |
| High beam | 12 V+ (300 mA) |
- CAN connection: Passenger side footwell (left kick panel).
View programmable outputs (26)
Tested on this vehicle and available by custom programming via PC with the 1403-PRG programmer (sold separately) or on request. ✓ Available – Not available
- ✓CAR LOCKING BY RKE/AUTOCLOSE
- –CAR LOCKING BY MECH. KEY
- ✓UNLOCK TRUNK BY RKE
- –AUTOCLOSE
- –CAR UNLOCKING BY MECH. KEY
- ✓IGNITION KEY ON
- ✓CAR LOCK BY RKE
- ✓CAR UNLOCKING BY RKE
- ✓PARKING LIGHTS
- ✓LOW BEAM LIGHTS
- ✓HIGH BEAM LIGHTS
- ✓PARKING BRAKE
- ✓FOOT BRAKE
- ✓REVERSE GEAR
- ✓CAR STATUS LOCKED
- ✓DOOR FRONT LEFT1
- ✓DOOR REAR LEFT1
- ✓DOOR FRONT RIGHT1
- ✓DOOR REAR RIGHT1
- ✓HOOD
- ✓TRUNK
- –TRUNK WINDOW
- ✓DOORS + HOOD
- ✓INHIBITION TIMER
- ✓INDICATOR LIGHTS
- ✓INDICATOR LIGHT LEFT
- ✓INDICATOR LIGHT RIGHT
- ✓ACCY ON TILL KEY REMOVED
- ✓ACCY ON TILL DOORS OPENED
- ✓ALARM ARMED
- –SEAT BELT DRIVER
- –SEAT BELT PASSENGER
- –CENTRAL DOOR LOCK
Comments
- 1Front and rear doors are reversed – driver door = front left signal.
Where a vehicle shows a required revision date, check the date on your module label and contact us if it is older. Programmable outputs need the 1403-PRG programmer or custom programming on request. Contact our technical support team for help. More vehicles will be added as they are confirmed.
This product comes with a 2 Year return to base warranty against manufacturing defects. For all technical support or to make a warranty claim, contact the company/business that supplied/installed the product for you. Advanced ICE Pty Ltd is not liable for any remove or refit charges incurred. If the product fails within 30 days of purchase or installation, the product will be replaced or exchanged provided sufficient proof can be provided via picture or video that the fault/problem is as a result of a manufacturing defect. If the product fails after 30 days, the product should be returned to Advanced ICE Pty Ltd and it will be repaired or replaced once confirmation is made that the fault/problem is because of a manufacturing defect. This warranty does not cover faults related to user error, damage or incorrect installation.
Please contact the company/business that installed the product for you and arrange a time to have the product inspected. If you do not know this information or you are experiencing problems making the warranty claim, please log a support case by emailing Advanced ICE Pty Ltd directly on the below email address. Before emailing, please ensure you have a copy of the Proof of purchase, the products serial number (if product is serialised) and the product has been registered on the Advanced ICE website.
Advanced ICE Pty Ltd – Email – support@advancedice.com.au – Website – www.advancedice.com.au
1 – This warranty document supersedes all other warranty information that may be listed on the Manufacturers website or in provided manuals or documentation.
2 – The end user agrees to use this product in compliance with all State and Federal laws. Advanced ICE Pty Ltd, the manufacturer or the seller will not be held liable for misuse of this product. If you do not agree, please do not purchase or install this product.
3 – We reserve the right to carry out technical changes to improve products at any time. Advanced ICE Pty Ltd does not guarantee that products can be updated with new features or software enhancements. If software updates are available, the product must be sent in at own cost. Advanced ICE Pty Ltd will not cover the labour cost for the removal and refitting of the product and other expenses involved with the software-updates.
4 – If the product is connected to or utilises the functionality or connectivity of other accessories or devices (ie Mobile Phone), Advanced ICE Pty Ltd does not guarantee the product will be compatible with future software updates of the device or new devices.
5 – Advanced ICE Pty Ltd does not guarantee that this product can be transferred to another vehicle, even though it may be a similar make and model.
6 – Advanced ICE Pty Ltd does not guarantee this product against future vehicle updates or warranty repairs (hardware or software) performed by the vehicle manufacturer.
7 – Please check with the vehicles manufacturer if installation of aftermarket products will affect the vehicles warranty before purchasing and/or installing this product. Advanced ICE Pty Ltd assumes no liability.
8 – Removal and refit charges related to any warranty claim are at the discretion of the seller of the product. If another seller is used for removal and refit of any warranty claim this will be payable by the end user.
9 – Technical support for software updates that can be performed by the user are not covered under warranty and a service charge will apply.
1 – This warranty document supersedes all other warranty information that may be listed on the Manufacturers website or in provided manuals or documentation.
2 – The end user agrees to use this product in compliance with all State and Federal laws. Advanced ICE Pty Ltd, the manufacturer or the seller will not be held liable for misuse of this product. If you do not agree, please do not purchase or install this product.
3 – We reserve the right to carry out technical changes to improve products at any time. Advanced ICE Pty Ltd does not guarantee that products can be updated with new features or software enhancements. If software updates are available, the product must be sent in at own cost. Advanced ICE Pty Ltd will not cover the labour cost for the removal and refitting of the product and other expenses involved with the software-updates.
4 – If the product is connected to or utilises the functionality or connectivity of other accessories or devices (ie Mobile Phone), Advanced ICE Pty Ltd does not guarantee the product will be compatible with future software updates of the device or new devices.
5 – Advanced ICE Pty Ltd does not guarantee that this product can be transferred to another vehicle, even though it may be a similar make and model.
6 – Advanced ICE Pty Ltd does not guarantee this product against future vehicle updates or warranty repairs (hardware or software) performed by the vehicle manufacturer.
7 – Please check with the vehicles manufacturer if installation of aftermarket products will affect the vehicles warranty before purchasing and/or installing this product. Advanced ICE Pty Ltd assumes no liability.
8 – Removal and refit charges related to any warranty claim are at the discretion of the seller of the product. If another seller is used for removal and refit of any warranty claim this will be payable by the end user.
9 – Technical support for software updates that can be performed by the user are not covered under warranty and a service charge will apply.
Advanced ICE Pty Ltd recommends that you read our website and watch any videos if available before purchasing to ensure that the features and functions of the product are suitable for your requirements. If you are not sure, please contact an authorised re seller or our sales and technical support team for further assistance before purchasing the product.
Change of Mind (Pre Installation) – Products can be returned within 14 days of purchase provided it is in Brand New unopened condition. Products must be returned to the place of purchase, they should not be returned directly to Advanced ICE if the product was purchased through a re seller. All Freight charges are at the buyer’s expense and a 10% fee will be charged to cover handling and restocking. A refund will only be issued once the product has been examined and confirmed to be in new condition.