Part: 1505
In Stock
$399.00
(Incl. GST)
As more and more cars are starting to use an electric handbrake, park brake alarms for fleet buyers and mine site compliance are becoming harder to install. So in conjunction with one of our partners, we have developed this simple to install CAN bus handbrake alarm.
Using the data from the vehicle’s CAN bus network, the system will give an audible alert if the driver door is opened while the park brake is not engaged. The alert latches on and can only be deactivated by engaging the manual or electric handbrake.
Installation is as simple as connecting two CAN bus wires, power & ground. The system has the following features:
- Speaker for audible alert
- Compatible with both electric and manual handbrakes
- Option to delay the alarm activation for 5 seconds
- Additional auxiliary trigger inputs for canopy door or storage locks
-
Can be set to alert on the following door combinations:
- Driver door only
- Driver & passenger door
- Driver and side door (ideal for vans)
- All doors
Additional CAN bus generated outputs
- 250mA 12V output for horn or visual alert
- 250mA 12V high beam output for spot lights or light bar
- 2A 12V accessory output for other aftermarket accessories
- 2A 12V reverse output for reverse buzzer or squawker
CAN-Bus handbrake alarm.
Electric or manual handbrake.
It detects your vehicle automatically and connects with just four wires: two CAN-Bus wires, power and ground. No software, no laptop and no programming.
Four wire install
Two CAN-Bus wires, power and ground. That is all it needs.
Electric or manual
Works with both electric and manual handbrakes.
Auto vehicle detection
It works out the vehicle by itself. No software, laptop or programming.
Software updatable
Updates add compatibility with future vehicles.
Outputs and inputs
High beam output
12V+ at 250mA. A trigger for spotlights or a light bar.
Reverse output
12V+ at 2A. Drives a reverse buzzer or squawker.
Additional alarm output
12V+ at 250mA. Activates the vehicle horn or adds a visual warning.
Accessory output
12V+ at 2A. Powers additional aftermarket products.
Auxiliary inputs
Extra triggers for things like canopy doors and storage locks.
Made in Germany
Built for precision, reliability and quality
Engineered and manufactured in Germany to a standard we have trusted for over 15 years.
15+
Years trusted
100%
German engineered
Compatible with Australia’s Favourite Vehicles
More compatibility options will be released in the future
Ford
Next-Gen Ranger 2022-Current
Next-Gen Everest 2022-Current
Next-Gen Ranger Super Duty 2024-Current
Toyota
N90 HiLux
LC250 LandCruiser Prado
LC300 LandCruiser 2025+
HiAce Van 2026+
Isuzu
D-Max 2020-Current
MUX 2022-Current
Mazda
BT-50 2020-Current
Volkswagen
Amarok 2023-Current
We are working on the current vehicles
Nissan Navara D27
Mitsubishi Triton
BYD Shark 6
Ford Transit Vans
GWM Canon
Subaru Forestor and more
For full vehicle compatibility details, see the Compatibility tab.
Compatible vehicles
Select your vehicle to see the outputs, inputs and where to connect.
✓ Verified on the vehicle – Not yet verified
Ford 2 vehicles
F150
2023 on
Requires firmware 0.0.3 or later
Outputs
| Function | Wire | Output | Verified |
|---|---|---|---|
| Reverse | White | 12 V+ (2 A) | ✓ |
| Accessory (ACC / ignition) | Pink | 12 V+ (2 A) | ✓ |
| High beam | Orange | 12 V+ (250 mA) | ✓ |
| Handbrake alarm (light / buzzer) | Yellow/Red | 12 V+ (250 mA) | ✓ |
| Handbrake | Green | 12 V− (250 mA) | ✓ |
| Seat belt | Brown | 12 V− (250 mA) | ✓ |
Inputs
| Function | Wire | Setting | Verified |
|---|---|---|---|
| Manual handbrake input | Purple | Internal dipswitch 3 ON/UP. Reads ground with the handbrake on. Electric handbrake: leave the dipswitch OFF/DOWN and ground this wire. | ✓ |
| Canopy door input | Grey | Internal dipswitch 2 OFF/DOWN: ground = door closed. ON/UP: open circuit = door closed. No canopy switch: ground this wire. | ✓ |
- Electric handbrake: the handbrake is read from CAN. All internal and external dipswitches OFF/DOWN.
- Important: the handbrake does not apply automatically when the car selects Park. Apply the handbrake before getting out, or the alarm will go off.
- CAN connection: driver side door sill wiring loom, or passenger side footwell (kick panel) – grey connector behind the trim.
Ranger / Super Duty / Everest
2022 on
Requires firmware 0.0.2 or later
Outputs
| Function | Wire | Output | Verified |
|---|---|---|---|
| Reverse | White | 12 V+ (2 A) | ✓ |
| Accessory (ACC / ignition) | Pink | 12 V+ (2 A) | ✓ |
| High beam | Orange | 12 V+ (250 mA) | ✓ |
| Handbrake alarm (light / buzzer) | Yellow/Red | 12 V+ (250 mA) | ✓ |
| Handbrake | Green | 12 V− (250 mA) | ✓ |
| Seat belt | Brown | 12 V− (250 mA) | ✓ |
Inputs
| Function | Wire | Setting | Verified |
|---|---|---|---|
| Manual handbrake input | Purple | Internal dipswitch 3 ON/UP. Reads ground with the handbrake on. Electric handbrake: leave the dipswitch OFF/DOWN and ground this wire. | ✓ |
| Canopy door input | Grey | Internal dipswitch 2 OFF/DOWN: ground = door closed. ON/UP: open circuit = door closed. No canopy switch: ground this wire. | ✓ |
- CAN connection: driver footwell, or passenger footwell (use the twisted pair).
Isuzu 2 vehicles
D-MAX
2020 on
Requires firmware 0.0.3 or later
Outputs
| Function | Wire | Output | Verified |
|---|---|---|---|
| Reverse | White | 12 V+ (2 A) | ✓ |
| Accessory (ACC / ignition) | Pink | 12 V+ (2 A) | ✓ |
| High beam | Orange | 12 V+ (250 mA) | ✓ |
| Handbrake alarm (light / buzzer) | Yellow/Red | 12 V+ (250 mA) | ✓ |
| Handbrake | Green | 12 V− (250 mA) | ✓ |
| Seat belt – with ignition on or engine running | Brown | 12 V− (250 mA) | ✓ |
Inputs
| Function | Wire | Setting | Verified |
|---|---|---|---|
| Manual handbrake input | Purple | Internal dipswitch 3 ON/UP. Reads ground with the handbrake on. Electric handbrake: leave the dipswitch OFF/DOWN and ground this wire. | ✓ |
| Canopy door input | Grey | Internal dipswitch 2 OFF/DOWN: ground = door closed. ON/UP: open circuit = door closed. No canopy switch: ground this wire. | ✓ |
- Manual handbrake: set internal dipswitch 3 ON/UP and connect the purple wire to the handbrake switch wire.
- CAN connection: driver side kick panel.
MU-X
2022 on
Requires firmware 0.0.3 or later
Outputs
| Function | Wire | Output | Verified |
|---|---|---|---|
| Reverse | White | 12 V+ (2 A) | ✓ |
| Accessory (ACC / ignition) | Pink | 12 V+ (2 A) | ✓ |
| High beam | Orange | 12 V+ (250 mA) | ✓ |
| Handbrake alarm (light / buzzer) | Yellow/Red | 12 V+ (250 mA) | ✓ |
| Handbrake | Green | 12 V− (250 mA) | ✓ |
| Seat belt | Brown | 12 V− (250 mA) | ✓ |
Inputs
| Function | Wire | Setting | Verified |
|---|---|---|---|
| Manual handbrake input | Purple | Not needed – the MU-X has an electric handbrake. Leave internal dipswitch 3 OFF/DOWN and ground this wire. | ✓ |
| Canopy door input | Grey | Internal dipswitch 2 OFF/DOWN: ground = door closed. ON/UP: open circuit = door closed. No canopy switch: ground this wire. | – |
- Electric handbrake: the handbrake is read from CAN. All internal and external dipswitches OFF/DOWN.
- Important: after putting the car in Park, apply the handbrake before turning the engine or ignition off. If this is not done in that order, the alarm will go off – press the Start button twice to turn the ignition on again so the alarm can read the handbrake and turn off.
- CAN connection: driver side kick panel.
Mazda 1 vehicle
BT-50
2021 on
Requires firmware 0.0.3 or later
Outputs
| Function | Wire | Output | Verified |
|---|---|---|---|
| Reverse | White | 12 V+ (2 A) | ✓ |
| Accessory (ACC / ignition) | Pink | 12 V+ (2 A) | ✓ |
| High beam | Orange | 12 V+ (250 mA) | ✓ |
| Handbrake alarm (light / buzzer) | Yellow/Red | 12 V+ (250 mA) | ✓ |
| Handbrake | Green | 12 V− (250 mA) | ✓ |
| Seat belt – with ignition on or engine running | Brown | 12 V− (250 mA) | ✓ |
Inputs
| Function | Wire | Setting | Verified |
|---|---|---|---|
| Manual handbrake input | Purple | Internal dipswitch 3 ON/UP. Reads ground with the handbrake on. Electric handbrake: leave the dipswitch OFF/DOWN and ground this wire. | ✓ |
| Canopy door input | Grey | Internal dipswitch 2 OFF/DOWN: ground = door closed. ON/UP: open circuit = door closed. No canopy switch: ground this wire. | ✓ |
- Manual handbrake: set internal dipswitch 3 ON/UP and connect the purple wire to the handbrake switch wire.
- CAN connection: driver side kick panel.
Toyota 5 vehicles
Hiace (facelift)
2025 on
Requires special firmware
Outputs
| Function | Wire | Output | Verified |
|---|---|---|---|
| Reverse | White | 12 V+ (2 A) | ✓ |
| Accessory (ACC / ignition) | Pink | 12 V+ (2 A) | ✓ |
| High beam | Orange | 12 V+ (250 mA) | ✓ |
| Handbrake alarm (light / buzzer) | Yellow/Red | 12 V+ (250 mA) | ✓ |
| Handbrake | Green | 12 V− (250 mA) | ✓ |
| Seat belt | Brown | 12 V− (250 mA) | ✓ |
Inputs
| Function | Wire | Setting | Verified |
|---|---|---|---|
| Manual handbrake input | Purple | Internal dipswitch 3 ON/UP. Reads ground with the handbrake on. Electric handbrake: leave the dipswitch OFF/DOWN and ground this wire. | ✓ |
| Canopy door input | Grey | Internal dipswitch 2 OFF/DOWN: ground = door closed. ON/UP: open circuit = door closed. No canopy switch: ground this wire. | ✓ |
- Requires the special firmware file – contact us or download it from the dealer login.
- CAN connection: blue plug, driver side kick panel.
Hilux (N90)
2026 on
Requires firmware 0.0.2 or later
Outputs
| Function | Wire | Output | Verified |
|---|---|---|---|
| Reverse | White | 12 V+ (2 A) | ✓ |
| Accessory (ACC / ignition) | Pink | 12 V+ (2 A) | ✓ |
| High beam | Orange | 12 V+ (250 mA) | ✓ |
| Handbrake alarm (light / buzzer) | Yellow/Red | 12 V+ (250 mA) | ✓ |
| Handbrake | Green | 12 V− (250 mA) | ✓ |
| Seat belt | Brown | 12 V− (250 mA) | ✓ |
Inputs
| Function | Wire | Setting | Verified |
|---|---|---|---|
| Manual handbrake input | Purple | Internal dipswitch 3 ON/UP. Reads ground with the handbrake on. Electric handbrake: leave the dipswitch OFF/DOWN and ground this wire. | ✓ |
| Canopy door input | Grey | Internal dipswitch 2 OFF/DOWN: ground = door closed. ON/UP: open circuit = door closed. No canopy switch: ground this wire. | ✓ |
- Manual handbrake: set internal dipswitch 3 ON/UP and connect the purple wire to the handbrake switch wire. (SR models)
- SR handbrake switch wire: dark green wire at the grey 22-pin connector behind the black plug, driver side kick panel.
- CAN connection: behind the instrument cluster.
Hilux EV
2026 on
Requires firmware 0.0.2 or later
Outputs
| Function | Wire | Output | Verified |
|---|---|---|---|
| Reverse | White | 12 V+ (2 A) | ✓ |
| Accessory (ACC / ignition) | Pink | 12 V+ (2 A) | ✓ |
| High beam | Orange | 12 V+ (250 mA) | ✓ |
| Handbrake alarm (light / buzzer) | Yellow/Red | 12 V+ (250 mA) | ✓ |
| Handbrake | Green | 12 V− (250 mA) | ✓ |
| Seat belt | Brown | 12 V− (250 mA) | ✓ |
Inputs
| Function | Wire | Setting | Verified |
|---|---|---|---|
| Manual handbrake input | Purple | Internal dipswitch 3 ON/UP. Reads ground with the handbrake on. Electric handbrake: leave the dipswitch OFF/DOWN and ground this wire. | ✓ |
| Canopy door input | Grey | Internal dipswitch 2 OFF/DOWN: ground = door closed. ON/UP: open circuit = door closed. No canopy switch: ground this wire. | ✓ |
- CAN connection: behind the instrument cluster.
LandCruiser 250 Prado
2025 on
Requires firmware 0.0.2 or later
Outputs
| Function | Wire | Output | Verified |
|---|---|---|---|
| Reverse | White | 12 V+ (2 A) | ✓ |
| Accessory (ACC / ignition) | Pink | 12 V+ (2 A) | ✓ |
| High beam | Orange | 12 V+ (250 mA) | ✓ |
| Handbrake alarm (light / buzzer) | Yellow/Red | 12 V+ (250 mA) | ✓ |
| Handbrake | Green | 12 V− (250 mA) | ✓ |
| Seat belt | Brown | 12 V− (250 mA) | ✓ |
Inputs
| Function | Wire | Setting | Verified |
|---|---|---|---|
| Manual handbrake input | Purple | Internal dipswitch 3 ON/UP. Reads ground with the handbrake on. Electric handbrake: leave the dipswitch OFF/DOWN and ground this wire. | ✓ |
| Canopy door input | Grey | Internal dipswitch 2 OFF/DOWN: ground = door closed. ON/UP: open circuit = door closed. No canopy switch: ground this wire. | ✓ |
- CAN connection: driver footwell.
LandCruiser 300
2025 on
Requires firmware 0.0.2 or later
Outputs
| Function | Wire | Output | Verified |
|---|---|---|---|
| Reverse | White | 12 V+ (2 A) | ✓ |
| Accessory (ACC / ignition) | Pink | 12 V+ (2 A) | ✓ |
| High beam | Orange | 12 V+ (250 mA) | ✓ |
| Handbrake alarm (light / buzzer) | Yellow/Red | 12 V+ (250 mA) | ✓ |
| Handbrake | Green | 12 V− (250 mA) | ✓ |
| Seat belt | Brown | 12 V− (250 mA) | ✓ |
Inputs
| Function | Wire | Setting | Verified |
|---|---|---|---|
| Manual handbrake input | Purple | Internal dipswitch 3 ON/UP. Reads ground with the handbrake on. Electric handbrake: leave the dipswitch OFF/DOWN and ground this wire. | ✓ |
| Canopy door input | Grey | Internal dipswitch 2 OFF/DOWN: ground = door closed. ON/UP: open circuit = door closed. No canopy switch: ground this wire. | ✓ |
- CAN connection: passenger side.
Volkswagen 1 vehicle
Amarok
2023 on
Requires firmware 0.0.2 or later
Outputs
| Function | Wire | Output | Verified |
|---|---|---|---|
| Reverse | White | 12 V+ (2 A) | ✓ |
| Accessory (ACC / ignition) | Pink | 12 V+ (2 A) | ✓ |
| High beam | Orange | 12 V+ (250 mA) | ✓ |
| Handbrake alarm (light / buzzer) | Yellow/Red | 12 V+ (250 mA) | ✓ |
| Handbrake | Green | 12 V− (250 mA) | ✓ |
| Seat belt | Brown | 12 V− (250 mA) | ✓ |
Inputs
| Function | Wire | Setting | Verified |
|---|---|---|---|
| Manual handbrake input | Purple | Internal dipswitch 3 ON/UP. Reads ground with the handbrake on. Electric handbrake: leave the dipswitch OFF/DOWN and ground this wire. | ✓ |
| Canopy door input | Grey | Internal dipswitch 2 OFF/DOWN: ground = door closed. ON/UP: open circuit = door closed. No canopy switch: ground this wire. | ✓ |
- CAN connection: driver side footwell, or passenger side footwell (Grey/Orange = CAN-H, Purple/Orange = CAN-L).
External dipswitch 1 sets the alarm delay; external dipswitches 2 and 3 set which doors trigger the alarm. All internal dipswitches are OFF/DOWN from the factory. Check the firmware revision on your module label against the vehicle above, and update the firmware if it is lower. More vehicles will be added as they are confirmed.
This product comes with a 1 Year return to base warranty against manufacturing defects. For all technical support or to make a warranty claim, contact the company/business that supplied/installed the product for you. Advanced ICE Pty Ltd is not liable for any remove or refit charges incurred. If the product fails within 30 days of purchase or installation, the product will be replaced or exchanged provided sufficient proof can be provided via picture or video that the fault/problem is as a result of a manufacturing defect. If the product fails after 30 days, the product should be returned to Advanced ICE Pty Ltd and it will be repaired or replaced once confirmation is made that the fault/problem is because of a manufacturing defect. This warranty does not cover faults related to user error, damage or incorrect installation.
Please contact the company/business that installed the product for you and arrange a time to have the product inspected. If you do not know this information or you are experiencing problems making the warranty claim, please log a support case by emailing Advanced ICE Pty Ltd directly on the below email address. Before emailing, please ensure you have a copy of the Proof of purchase, the products serial number (if product is serialised) and the product has been registered on the Advanced ICE website.
Advanced ICE Pty Ltd – Email – support@advancedice.com.au – Website – www.advancedice.com.au
1 – This warranty document supersedes all other warranty information that may be listed on the Manufacturers website or in provided manuals or documentation.
2 – The end user agrees to use this product in compliance with all State and Federal laws. Advanced ICE Pty Ltd, the manufacturer or the seller will not be held liable for misuse of this product. If you do not agree, please do not purchase or install this product.
3 – We reserve the right to carry out technical changes to improve products at any time. Advanced ICE Pty Ltd does not guarantee that products can be updated with new features or software enhancements. If software updates are available, the product must be sent in at own cost. Advanced ICE Pty Ltd will not cover the labour cost for the removal and refitting of the product and other expenses involved with the software-updates.
4 – If the product is connected to or utilises the functionality or connectivity of other accessories or devices (ie Mobile Phone), Advanced ICE Pty Ltd does not guarantee the product will be compatible with future software updates of the device or new devices.
5 – Advanced ICE Pty Ltd does not guarantee that this product can be transferred to another vehicle, even though it may be a similar make and model.
6 – Advanced ICE Pty Ltd does not guarantee this product against future vehicle updates or warranty repairs (hardware or software) performed by the vehicle manufacturer.
7 – Please check with the vehicles manufacturer if installation of aftermarket products will affect the vehicles warranty before purchasing and/or installing this product. Advanced ICE Pty Ltd assumes no liability.
8 – Removal and refit charges related to any warranty claim are at the discretion of the seller of the product. If another seller is used for removal and refit of any warranty claim this will be payable by the end user.
9 – Technical support for software updates that can be performed by the user are not covered under warranty and a service charge will apply.
A warranty claim will be rejected if:-
1 – Unauthorised changes or modifications have been made to the device or accessories.
2 – The devicee’s case, accessories, “Warranty Seals” or stickers have been damaged, opened and/or tampered with.
3 – Attempted unauthorised repairs to a product and/or accessories.
4 – Improper use or operation.
5 – Loading of unauthorised or incompatible software.
6 – Problems that relate to the installation of additional products or accessories not supplied by Advanced ICE Pty Ltd.
Advanced ICE Pty Ltd recommends that you read our website and watch any videos if available before purchasing to ensure that the features and functions of the product are suitable for your requirements. If you are not sure, please contact an authorised re seller or our sales and technical support team for further assistance before purchasing the product.
Change of Mind (Pre Installation) – Products can be returned within 14 days of purchase provided it is in Brand New unopened condition. Products must be returned to the place of purchase, they should not be returned directly to Advanced ICE if the product was purchased through a re seller. All Freight charges are at the buyerr’s expense and a 10% fee will be charged to cover handling and restocking. A refund will only be issued once the product has been examined and confirmed to be in new condition.
