Part: 1386

In Stock

Ask a question Find A Reseller

RRP

$349.00

*

(Incl. GST)

* does not include shipping or installation

Looking to add a second camera to the factory screen in your Toyota? Then this is the part for you. Whether it be a front camera or a camera on the back of your Caravan or Trailer this part will allow you to have this show on the factory screen whether you are driving forwards or in reverse.

The 1386 also has features that allow you to see your reverse camera (if installed) while driving forwards and also provides programming options for your secondary camera. This allows you to choose whether to have the secondary camera image show up until your turn it off or for set periods of time (e.g. 10 seconds).

Installation is completely plug and play.

Features

  • Retention of Factory Reverse Camera (if installed)
  • Additional RCA input for a Front, Caravan or Trailer Camera. If you would like 2 additional cameras please use 1386-1.
  • Ability to program secondary Camera to show for 5, 10, 15 or 20 seconds or push on / push off
  • Ability to program a Front Camera to automatically display on the screen when driving under 15km/h
  • See the secondary camera while driving forwards and in reverse.
  • See the factory camera while driving forwards and in reverse. Ability to disable this option if not required.

Note:

For vehicles with factory navigation, the cursor indicating the direction of travel will be temporarily interrupted while the 1386 is engaged. Current position and direction will be re-calibrated once the 1386 is turned off.

This product is compatible with the following Toyota vehicles:

  • 86 from 2017 to 2018
  • Aurion from 2015
  • Camry from 2015 to 2017
  • Corolla from 2014 to 2018
  • Fortuner from 2015
  • Hilux from 2014
  • Landcruiser Prado GX/GXL from 2014
  • Landcruiser Prado Altitude/VX from 2014 to 2017 (without surround view camera)
  • Rav4 from 2014 to 2018

Note:

Vehicles must have the 24-pin and 28-pin connectors on the back of the radio.

Q:Will this system allow me to install both a Front Camera and also a Caravan/Trailer Camera?
A:No. To be able to run both a Front Camera and a Caravan/Trailer camera through this system, you need extra parts. Please use the 1386-1.

Q:Can I use this part if my Caravan has 2 cameras installed at the back?
A:Unfortunately not. This system can only run 1 extra camera input on top of the Reverse Camera. For any application that requires mulitple cameras, please contact us with details of your cameras and we can advise the best solution for your needs.

Q:What are the benefits of your system?
A:Our system only requires 1 switch for both reverse and driving forward. With the inclusion of a small module, our system also allows some programming of the module to customize its operation. This is especially useful when using it for a front camera but can also be beneficial when using it for a Caravan/Trailer Camera.

Q:Can this product be used to show my Factory Reverse Camera while driving forwards?
A:Yes. The first press of the Camera button will take you to the Front/Caravan/Trailer Camera and a second press will display your Factory Reverse Camera.

Q:Can I use this part to only show my Factory Reverse Camera whenever I want?
A:You can, though there is no way to disable the first input. You will always need to press the Camera button twice to access the Factory Reverse Camera.

Q:Is it possible to disable the option to see the Factory Reverse Camera when driving forwards?
A:Yes.

Q:Can I use the 1386 and the 1389 together?
A:Yes.

Q:Can the Front Camera come on automatically based on my speed?
A:Yes it can. There is an option to enable this feature for when you go under 15km/h. This speed cannot be adjusted.

Q:Are there other ways to activate the Front Camera?
A:Yes there are. You can set the module to come on when you press the Camera button. You can then choose for it to show for 5, 10, 15 or 20 secs before turning off automatically or a fifth option is for it to stay on until you press the Camera button again to turn it off.

Q:What happens when I put the vehicle into Reverse?
A:Your Factory Camera will display on the screen as usual. You can then switch between cameras by pressing the Camera button.

Warranty Information

This product comes with a 1 Year* return to base warranty against manufacturing defects. For all technical support or to make a warranty claim, contact the company/business that supplied/installed the product for you. Advanced ICE Pty Ltd is not liable for any remove or refit charges incurred. If the product fails within 30 days of purchase or installation, the product will be replaced or exchanged provided sufficient proof can be provided via picture or video that the fault/problem is as a result of a manufacturing defect. If the product fails after 30 days, the product should be returned to Advanced ICE Pty Ltd and it will be repaired or replaced once confirmation is made that the fault/problem is because of a manufacturing defect. This warranty does not cover faults related to user error, damage or incorrect installation.

*If this product contains a Navigation SD card this is limited to a 1 year warranty and subject to inspection. 

Please contact the company/business that installed the product for you and arrange a time to have the product inspected. If you do not know this information or you are experiencing problems making the warranty claim, please log a support case by emailing Advanced ICE Pty Ltd directly on the below email address. Before emailing, please ensure you have a copy of the Proof of purchase, the products serial number (if product is serialised) and the product has been registered on the Advanced ICE website.

Advanced ICE Pty Ltd – Email – support@advancedice.com.au – Website – www.advancedice.com.au

Warranty Terms & Conditions

1 – This warranty document supersedes all other warranty information that may be listed on the Manufacturers website or in provided manuals or documentation.
2 – The end user agrees to use this product in compliance with all State and Federal laws. Advanced ICE Pty Ltd, the manufacturer or the seller will not be held liable for misuse of this product. If you do not agree, please do not purchase or install this product.
3 – We reserve the right to carry out technical changes to improve products at any time. Advanced ICE Pty Ltd does not guarantee that products can be updated with new features or software enhancements. If software updates are available, the product must be sent in at own cost. Advanced ICE Pty Ltd will not cover the labour cost for the removal and refitting of the product and other expenses involved with the software-updates.
4 – If the product is connected to or utilises the functionality or connectivity of other accessories or devices (ie Mobile Phone), Advanced ICE Pty Ltd does not guarantee the product will be compatible with future software updates of the device or new devices.
5 – Advanced ICE Pty Ltd does not guarantee that this product can be transferred to another vehicle, even though it may be a similar make and model.
6 – Advanced ICE Pty Ltd does not guarantee this product against future vehicle updates or warranty repairs (hardware or software) performed by the vehicle manufacturer.
7 – Please check with the vehicles manufacturer if installation of aftermarket products will affect the vehicles warranty before purchasing and/or installing this product. Advanced ICE Pty Ltd assumes no liability.
8 – Removal and refit charges related to any warranty claim are at the discretion of the seller of the product. If another seller is used for removal and refit of any warranty claim this will be payable by the end user.
9 – Technical support for software updates that can be performed by the user are not covered under warranty and a service charge will apply.

What's Not Covered

A warranty claim will be rejected if:-
1 – Unauthorised changes or modifications have been made to the device or accessories.
2 – The device’s case, accessories, “Warranty Seals” or stickers have been damaged, opened and/or tampered with.
3 – Attempted unauthorised repairs to a product and/or accessories.
4 – Improper use or operation.
5 – Loading of unauthorised or incompatible software.
6 – Problems that relate to the installation of additional products or accessories not supplied by Advanced ICE Pty Ltd.
7 – Navigation SD Card has been tampered with or has had unauthorised or incompatible maps or files added.

Returns Policy

Advanced ICE Pty Ltd recommends that you read our website and watch any videos if available before purchasing to ensure that the features and functions of the product are suitable for your requirements. If you are not sure, please contact an authorised re seller or our sales and technical support team for further assistance before purchasing the product. 

Change of Mind (Pre Installation) – Products can be returned within 14 days of purchase provided it is in Brand New unopened condition. Products must be returned to the place of purchase, they should not be returned directly to Advanced ICE if the product was purchased through a re seller. All Freight charges are at the buyer’s expense and a 10% fee will be charged to cover handling and restocking. A refund will only be issued once the product has been examined and confirmed to be in new condition.

Get in touch

Email us for a quick response