fbpx

Part: 1343

Special Order Item

RRP

$899.00

*

* does not include shipping or installation

1545

The M650-GM produces a completely flat audio output without any factory time delay or equalization, eliminating the need for summing devices, an audio correction DSP or the removal of the factory audio compensation microphones. 

It is 100% plug-and-play, installing at the factory tuner in of GM vehicles fitted with the BOSE Audio System. Installation of the interface requires absolutely no modification to the vehicle or the removal of any factory equipment and can be used when completely replacing the factory speakers, or in any combination utilizing the factory audio components. Volume, Fade and Balance are supported through the factory radio and steering wheel controls.

Utilizing a 128 bit per channel floating point DSP and 192 kHz 32 bit DAC, the M650-GM produces a 6 channel analog output (Front L/R, Rear L/R, Sub and Center) with a peak voltage of 6.3V and a S/N Ratio of 112dB. All warning chimes and audible turn signal indications are attenuated to factory levels and, along with Onstar®, Navigation prompts and Bluetooth, are passed to the proper output channels, eliminating the need for an external speaker. The unit provides a 500mA output for controlling aftermarket devices and, additionally, retains the factory 3 band equalizer (high, mid and bass).

For use with 3rd party digital sound processors, the M650-GM includes a variable TosLink (optical) and S/PDIF (coaxial) digital output which may be used simultaneously with the analog outputs, or by themselves. The variable digital output allows for the system volume to be controlled via the factory radio and steering wheel controls without the need to access any 3rd party controller.

For ease of use, the M650-GM is configurable through dip switch settings. User selectable features of the M650-GM are:

  • Time alignment to driver (Full-Sized SUV and Truck Only) or no time alignment (Analog output only)
  • Full Scale output (0 db) vs attenuated output (-12 db) (When attenuated, output is reduced to ~3v for extended headroom)
  • Factory Bass control becomes a Subwoofer Level Controller or Controls Bass for the entire system (Analog output only) – eliminates the need for a sub control knob!
  • Loudness control for extended bass response at low levels or loudness off (Analog output only)

The M650-GM currently supports the following vehicle infotainment platforms with BOSE Audio:

  • Holden Colorado, Trailblazer, Equinox
  • Chevrolet Silverado, Camaro & Corvette C7
  • GMC Sierra & Denali
  • Cadillac Escalade between 2015 – 2020

Note:- Not compatible with vehicles WITHOUT factory BOSE Audio System.

  • This is a special order item and has an eta of 1 – 2 weeks depending on our ordering cycle and product availability with our supplier.
Warranty Information

This product comes with a 2 Year return to base warranty against manufacturing defects. For all technical support or to make a warranty claim, contact the company/business that supplied/installed the product for you. Advanced ICE Pty Ltd is not liable for any remove or refit charges incurred. If the product fails within 30 days of purchase or installation, the product will be replaced or exchanged provided sufficient proof can be provided via picture or video that the fault/problem is as a result of a manufacturing defect. If the product fails after 30 days, the product should be returned to Advanced ICE Pty Ltd and it will be repaired or replaced once confirmation is made that the fault/problem is because of a manufacturing defect. This warranty does not cover faults related to user error, damage or incorrect installation.

Please contact the company/business that installed the product for you and arrange a time to have the product inspected. If you do not know this information or you are experiencing problems making the warranty claim, please log a support case by emailing Advanced ICE Pty Ltd directly on the below email address. Before emailing, please ensure you have a copy of the Proof of purchase, the products serial number (if product is serialised) and the product has been registered on the Advanced ICE website.

Advanced ICE Pty Ltd – Email – support@advancedice.com.au – Website – www.advancedice.com.au

Warranty Terms & Conditions

1 – This warranty document supersedes all other warranty information that may be listed on the Manufacturers website or in provided manuals or documentation.
2 – The end user agrees to use this product in compliance with all State and Federal laws. Advanced ICE Pty Ltd, the manufacturer or the seller will not be held liable for misuse of this product. If you do not agree, please do not purchase or install this product.
3 – We reserve the right to carry out technical changes to improve products at any time. Advanced ICE Pty Ltd does not guarantee that products can be updated with new features or software enhancements. If software updates are available, the product must be sent in at own cost. Advanced ICE Pty Ltd will not cover the labour cost for the removal and refitting of the product and other expenses involved with the software-updates.
4 – If the product is connected to or utilises the functionality or connectivity of other accessories or devices (ie Mobile Phone), Advanced ICE Pty Ltd does not guarantee the product will be compatible with future software updates of the device or new devices.
5 – Advanced ICE Pty Ltd does not guarantee that this product can be transferred to another vehicle, even though it may be a similar make and model.
6 – Advanced ICE Pty Ltd does not guarantee this product against future vehicle updates or warranty repairs (hardware or software) performed by the vehicle manufacturer.
7 – Please check with the vehicles manufacturer if installation of aftermarket products will affect the vehicles warranty before purchasing and/or installing this product. Advanced ICE Pty Ltd assumes no liability.
8 – Removal and refit charges related to any warranty claim are at the discretion of the seller of the product. If another seller is used for removal and refit of any warranty claim this will be payable by the end user.
9 – Technical support for software updates that can be performed by the user are not covered under warranty and a service charge will apply.

What's Not Covered

A warranty claim will be rejected if:-
1 – Unauthorised changes or modifications have been made to the device or accessories.
2 – The device’s case, accessories, “Warranty Seals” or stickers have been damaged, opened and/or tampered with.
3 – Attempted unauthorised repairs to a product and/or accessories.
4 – Improper use or operation.
5 – Loading of unauthorised or incompatible software.
6 – Problems that relate to the installation of additional products or accessories not supplied by Advanced ICE Pty Ltd.
7 – Navigation SD Card has been tampered with or has had unauthorised or incompatible maps or files added.

Returns Policy

Advanced ICE Pty Ltd recommends that you read our website and watch any videos if available before purchasing to ensure that the features and functions of the product are suitable for your requirements. If you are not sure, please contact an authorised re seller or our sales and technical support team for further assistance before purchasing the product. 

Change of Mind (Pre Installation) – Products can be returned within 14 days of purchase provided it is in Brand New unopened condition. Products must be returned to the place of purchase, they should not be returned directly to Advanced ICE if the product was purchased through a re seller. All Freight charges are at the buyer’s expense and a 10% fee will be charged to cover handling and restocking. A refund will only be issued once the product has been examined and confirmed to be in new condition.

Get in touch

Email us for a quick response